UNITED STATES

SECURITIES AND EXCHANGE COMMISSION 

WASHINGTON, D.C. 20549

FORM 10-K

(Mark One)

For the Fiscal Year Ended December 31, 2021

or

Commission File Number: 001-40739

858-800-2543 

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☒

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐  

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

As of June 30, 2021, the last business day of the registrant’s most recently completed second fiscal quarter, there was no established public market for the registrant’s Common Stock. The registrant’s Common Stock began trading on the NASDAQ Capital Market on August 12, 2021. Accordingly, the aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant computed by reference to the price of the registrant’s Common Stock as of the registrant’s most recently completed second fiscal quarter cannot be determined.

As of March 28, 2022, the number of outstanding shares of the registrant’s common stock, par value $0.0001 per share, was 8,328,629.

DOCUMENTS INCORPORATED BY REFERENCE

None.

DERMATA THERAPEUTICS, INC. 

(FORMERLY DERMATA THERAPEUTICS, LLC) 

ANNUAL REPORT ON FORM 10-K 

FOR THE FISCAL YEAR ENDED DECEMBER 31, 2021

TABLE OF CONTENTS

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This annual report on Form 10-K contains forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 under Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Forward-looking statements include statements with respect to our beliefs, plans, objectives, goals, expectations, anticipations, assumptions, estimates, intentions and future performance, and involve known and unknown risks, uncertainties and other factors, which may be beyond our control, and which may cause our actual results, performance or achievements to be materially different from future results, performance or achievements expressed or implied by such forward-looking statements. All statements other than statements of historical fact are statements that could be forward-looking statements. You can identify these forward-looking statements through our use of words such as “may,” “can,” “anticipate,” “assume,” “should,” “indicate,” “would,” “believe,” “contemplate,” “expect,” “seek,” “estimate,” “continue,” “plan,” “point to,” “project,” “predict,” “could,” “intend,” “target,” “potential” and other similar words and expressions of the future.

There are a number of important factors that could cause the actual results to differ materially from those expressed in any forward-looking statement made by us. These factors include, but are not limited to:

The foregoing does not represent an exhaustive list of matters that may be covered by the forward-looking statements contained herein or risk factors that we are faced with that may cause our actual results to differ from those anticipated in such forward-looking statements. Please see “Part I—Item 1A—Risk Factors” for additional risks which could adversely impact our business and financial performance.

All forward-looking statements are expressly qualified in their entirety by this cautionary notice. You are cautioned not to place undue reliance on any forward-looking statements, which speak only as of the date of this report or the date of the document incorporated by reference into this report. We have no obligation, and expressly disclaims any obligation, to update, revise or correct any of the forward-looking statements, whether as a result of new information, future events or otherwise. We have expressed our expectations, beliefs and projections in good faith and believe they have a reasonable basis. However, we cannot assure you that our expectations, beliefs or projections will result or be achieved or accomplished.

PART I

ITEM 1. BUSINESS

All references in this report to “Dermata,” the “Company,” “we,” “us,” or “our” mean Dermata Therapeutics, Inc. and its subsidiaries unless stated otherwise or the context otherwise indicates.

Overview

We are a clinical-stage medical dermatology company focused on identifying, developing, and commercializing innovative pharmaceutical product candidates for the treatment of medical and aesthetic skin conditions and diseases we believe represent significant market opportunities because current therapies are inadequate or non-existent.

Dermatological diseases such as acne vulgaris (or acne), psoriasis vulgaris (or psoriasis), papulopustular rosacea (or rosacea), hyperhidrosis and various aesthetic indications, affect millions of people worldwide each year, and may negatively impact their quality of life and emotional well-being. While there are multiple current treatment options for these indications on the market, we believe that most have significant drawbacks, including underwhelming efficacy, cumbersome application regimens and varying negative side effects, all of which we believe lead to decreased patient compliance. While a majority of these indications are first treated with topical products, many patients frequently switch treatments or discontinue treatment altogether due to patient dissatisfaction stemming from slow and modest response rates, early onset of negative side effects, onerous application schedules and typically long duration of therapy. For diseases like psoriasis, a small percentage of patients may be candidates for biologic or systemic therapies, but these patients are typically required to try topical or oral treatment options prior to qualifying for these expensive biologic or systemic therapies. Given the limitations with current topical therapies and the restricted usability of biologic and systemic therapies, we believe there is a significant opportunity to address the needs of frustrated patients searching for topical products that satisfy their dermatological and lifestyle needs.

Our two product candidates, DMT310 and DMT410, both incorporate our proprietary, multifaceted, Spongilla technology to topically treat a variety of dermatological conditions. Our Spongilla technology is a multifactorial, naturally-derived product that is processed from a naturally grown freshwater sponge, Spongilla lacustris or Spongilla, which is processed into a powder that is mixed with a fluidizing agent immediately prior to application by the patient to form an easily applicable paste. Spongilla is a unique freshwater sponge that only grows in commercial quantities in select regions of the world and under specific environmental conditions, all of which give it its distinctive anti-microbial, anti-inflammatory and mechanical properties. The combination of these environmental conditions, the proprietary harvesting protocols developed with our supplier, and our post-harvest processing procedures produce a pharmaceutical product candidate that optimizes the mechanical component as well as the chemical components of the sponge for a product candidate with multiple mechanisms of action for the treatment of inflammatory skin conditions.

Our lead product candidate DMT310, is intended to utilize our Spongilla technology for a once weekly treatment of a variety of skin diseases with our initial focus being for the treatment of acne vulgaris. However, due to the multiple mechanisms of action and anti-inflammatory effect seen with DMT310 throughout our various clinical trials for acne, we have quickly moved DMT310 into clinical trials for two additional indications, psoriasis and rosacea. We recently completed a Phase 1b proof of concept, or POC, trial in psoriasis and in November 2021 we initiated a Phase 2 clinical trial of DMT310 for the treatment of rosacea.

Our second product candidate utilizing our Spongilla technology is our combination treatment, DMT410. DMT410 is intended to consist of one treatment of our proprietary sponge powder followed by one topical application of botulinum toxin for delivery into the dermis. We first tested this program in a Phase 1 POC trial of axillary hyperhidrosis patients which saw 80% of patients achieve a reduction in gravimetric sweat production greater than 50% four weeks after treatment. Based on DMT410’s ability to effectively deliver botulinum toxin to the dermis, we initiated a Phase 1 POC trial of DMT410 for the treatment of multiple aesthetic skin conditions. On November 19, 2021, we announced top-line results from this trial where we saw encouraging data that we believe warrants further investigation of this program.

We believe our Spongilla technology platform will enable us to develop and formulate singular and combination products that are able to target topical delivery of chemical compounds into the dermis for a variety of indications. We believe the mechanical ability of the Spongilla technology allows for the intradermal delivery of a variety of large and small molecules to a targeted treatment site, through topical application as seen in our Phase 1a DMT410 hyperhidrosis trial. We believe the combination of Spongilla’s mechanical and chemical components (which we believe have demonstrated, in-vitro, anti-microbial and anti-inflammatory properties), add to the versatility of our Spongilla technology platform, allowing for application in the treatment of a wide variety of medical and aesthetic skin conditions and diseases.

DMT310 is intended to consist of two grams of powder processed from a naturally grown freshwater sponge, Spongilla lacustris, which powder is then mixed with a fluidizing agent (hydrogen peroxide) immediately prior to application by the patient to form an easily applicable paste, like a mud mask. The paste is left on the skin for approximately fifteen minutes until dry, after which time it is washed off with water. Due to the unique combination of DMT310’s mechanical components and chemical components, we believe patients will only need to apply the product once weekly to produce a treatment effect. The mechanical components of the Spongilla powder consist of many microscopic siliceous spicules that, when massaged into the skin, penetrate the stratum corneum (the skin’s outermost protective layer) and create microchannels into the dermis where many facets of inflammatory skin diseases reside. We believe that the penetration of the spicules cause opening of microchannels which allow oxygen to enter pilosebaceoius glands, helping to kill C. acnes, which grow in an anaerobic environment (C. acnes is the bacteria that cause inflammatory lesions in acne patients).  The spicules also cause turnover of the top layer of dead skin, increasing collagen production. The spicules may also provide a channel for DMT310’s naturally occurring chemical compounds to be delivered to the dermis and pilosebaceous glands, helping to kill the C. acnes. In addition to these anti-microbial compounds, DMT310 also appears to have anti-inflammatory chemical compounds, as demonstrated in in-vitro experiments, that inhibit inflammation through the reduction of C.acnes stimulated IL-8 production and by inhibiting IL-17A and IL-17F expression in human cell lines. Also during in-vitro studies of DMT310’s organic compounds, we observed the inhibition of lipogenesis of sebocytes, which may translate to a reduction in sebum (an oily and waxy substance produced by the human body’s sebaceous glands) production and oiliness of the skin in patients, which has been noted by a number of clinical investigators in our previous acne studies. We believe the combination of these biological effects along with the mechanical effects of the spicules are important factors to treat multiple inflammatory skin diseases.

Application of DMT310

Image 1: The Spongilla is processed into a fine powder and packaged into 2g pouches with a 6mL bottle of 3% H₂O₂ (hydrogen peroxide). Once per week, patients mix the powder with hydrogen peroxide, and massage the mixture onto their skin; after 10-15 minutes the product is easily removed with water.

DMT410 is the second product candidate from our Spongilla platform. We are developing DMT410 for the topical treatment of skin diseases and conditions typically treated with multiple intradermal injections of botulinum toxin. DMT410’s combination treatment regimen uses one application of our unique Spongilla powder followed by one topical application of botulinum toxin to enable the topical delivery of botulinum toxin into the dermis for the treatment of a variety of indications, including for the treatment of hyperhidrosis and multiple aesthetic skin conditions, including improvement in overall skin quality, reducing pore size and count, reducing sebum production, reducing fine lines and increasing brightness and luminosity. If approved by the FDA, we believe DMT410’s topical delivery of botulinum toxin can greatly increase its market opportunities due DMT410’s needle-free application, targeted intradermal delivery and potential for expanded indications.

We believe that the current medical and aesthetic dermatology landscape lacks innovative treatment options, mainly seeing the introduction of reformulations and combinations of old molecules. This provides an ideal opportunity to change how patients treat their skin conditions. With our anticipated once weekly treatment schedule, we believe we can become a leader in the space with a product candidate derived from a natural sponge that may improve patient compliance with minimal side effects and a rapid time to treatment effect, as seen in our multiple clinical trials in acne and psoriasis. If we can successfully develop our product candidates, receive FDA approval, develop a concentrated prescribing base of dermatologists, and utilize our management’s prior experience, we believe we have the ability to build a commercial organization to develop and commercialize treatment options in our core areas of focus within the dermatology space.

Our Clinical Development Pipeline and Product Candidates

Our clinical development pipeline currently consists of DMT310 and DMT410, each in development for multiple skin diseases and conditions. In the accompanying section we will describe each product candidate, its benefits, and our market strategy for each product candidate. The dates reflected in the below table and sections are estimates only, and there can be no assurances that the events included in the below table or sections will be completed on the anticipated timeline presented, or at all.

DMT310

Moderate-to-Severe Acne. In June 2020, we completed a randomized, double-blind, multicenter, placebo-controlled Phase 2b clinical trial of DMT310 for the once weekly treatment of moderate-to-severe acne. DMT310 showed statistically significant improvement versus placebo for all three endpoints (inflammatory lesion counts, non-inflammatory lesion counts, and the Investigators Global Assessment), after only four topical treatments and continued until the end of study at week 12. We plan on using these same endpoints in our two upcoming Phase 3 trials to support the filing of our NDA for DMT310 for the treatment of moderate-to-severe acne vulgaris. We believe these results from once weekly applications may favorably position DMT310 in the market for the treatment of moderate-to-severe acne. We intend to initiate the two required Phase 3 clinical trials in 2023 after holding our End of Phase 2 meeting with the FDA in the first half of 2023.

Mild-to-Moderate Psoriasis. In October 2021, we completed a Phase 1b POC trial of DMT310 for the once weekly treatment of mild-to-moderate psoriasis. Plaque psoriasis is a chronic, inflammatory skin disease that comprises approximately 80% of the psoriasis market as of 2019, according to Fortune Business Insights Market Research Report, with a majority of patients having mild-to-moderate disease which makes them less likely to receive an approved biologic treatment, that are only indicated for patients with moderate to severe disease, as a first line therapy. Due to the large population of patients who suffer from mild-to-moderate psoriasis, and lack of effective topical therapies for more mild disease, we believe there is a large unmet need for an effective topical product with limited side effects. Based on the data in our Phase 1b POC trial, the in-vitro data of DMT310’s reduction of IL-17A and IL-17F, and the anti-inflammatory effects we observed in its Phase 2b trial for acne, we believe DMT310 may be used as a first-line therapy for patients suffering from mild-to-moderate psoriasis who are not candidates for biologic treatments.

In October 2021, we announced top-line results from our Phase 1b POC trial of DMT310 for the treatment of 30 mild-to-moderate patients with psoriatic lesions covering between 2% to 30% of their body surface area. Patients were treated with DMT310 once a week for 12 weeks. Based on the efficacy, safety and tolerability profile observed in the POC trial, we initiated additional work to better inform our clinical trial design prior to moving into a larger Phase 2, placebo-controlled, clinical trial, which we anticipate initiating in 2022. Assuming this trial is successful, we plan on requesting an End of Phase 2 meeting with the FDA in 2023, followed by  Phase 3 psoriasis studies in the first half of 2024.

Moderate-to-Severe Rosacea. We enrolled our first patient in a Phase 2 clinical trial of DMT310 for the once weekly treatment of moderate-to-severe rosacea in November 2021. Papulopustular Rosacea, or subtype II, is a chronic skin disease characterized by inflammatory lesions on the face that typically affects adults of all ages, but particularly affects women aged 30-50 and can cause great emotional and psychological distress. Due to the lack of effective therapies currently on the market, we believe there is a significant need for an effective topical product with limited side effects. Based on the effect against inflammatory lesions observed in the Phase 2b acne trial, along with multiple biomarkers seen in-vitro, we believe DMT310 may have similar anti-inflammatory effects in rosacea as seen in acne due to it also being a disease of inflammatory lesions on the face and may be a potential treatment option for patients suffering from this disease. We plan to enroll 180 patients, 18 years of age or older, with moderate-to-severe rosacea and provide them with once weekly treatments of DMT310 for 12 weeks and plan to report top-line results from this trial in the second half of 2022. The clinical endpoints for this trial are intended to be the absolute reduction in inflammatory lesion count, and an Investigator’s Global Assessment score on a scale of 0 to 4.

There can be no assurance that DMT310 will receive FDA approval for any of the foregoing indications.

DMT410

We are developing the second product candidate from our Spongilla platform, DMT410, for the topical treatment of skin diseases and aesthetic conditions typically treated with multiple injections of botulinum toxin. Currently, botulinum toxin must be injected multiple times to successfully deliver enough botulinum toxin to the desired treatment area. While injections are effective for many different diseases and aesthetic conditions, they limit botulinum toxin’s use for additional conditions where injections are difficult, painful, or otherwise not viable. DMT410’s combination treatment regimen uses one application of our unique Spongilla powder followed by one topical application of botulinum toxin. The Spongilla powder is mixed with a fluidizing agent and is massaged into a patient’s treatment area by the treating physician to enhance spicule penetration to create microchannels into the dermis. After 10 to 15 minutes, the physician removes the Spongilla mask with water. The physician then expresses botulinum toxin from a syringe in precise amounts and onto the patient’s skin. The botulinum toxin is then massaged into the treatment area to take advantage of the microchannels created by Spongilla’s spicules, which allows the botulinum toxin to penetrate the stratum corneum and enter the dermis. We believe this treatment application will enable the topical delivery of botulinum toxin into the dermis for the treatment of a variety of medical diseases, including for the treatment of hyperhidrosis, acne, and rosacea, as well as improving skin, luminosity, brightness, and reducing pore size and count, and fine lines. We believe DMT410’s topical delivery of botulinum toxin can greatly increase market opportunities for botulinum toxin due DMT410’s needle-free application, targeted intradermal delivery and potential for expanded indications that do not require injections.

To date, we have completed an open-label Phase 1b POC clinical trials of DMT410 for the treatment of axillary hyperhidrosis and an open-label Phase 1b POC clinical trial in multiple aesthetic skin conditions. The Phase 1b POC trial for axillary hyperhidrosis consisted of 10 patients receiving one treatment of DMT410 on each axilla. Four weeks after one treatment with DMT410, patients exhibited reduction in sweat production. The clinical endpoints for this trial included (i) percent of patients with greater than 50% reduction in gravimetrically measured sweat production from baseline, (ii) percent of patients with gravimetric sweat production less than 50mg, and (iii) percent change in gravimetric sweat production. Four weeks after one treatment with DMT410, 80% of patients experienced a decrease in gravimetric sweat production greater than 50%, 85% of patients experienced gravimetric sweat production of less than 50mg, and patients had an average decrease in gravimetric sweat production of 75% from baseline. We believe these results support that DMT410 may aid in the topical delivery of botulinum toxin into the dermis for a treatment effect similar to multiple injections of botulinum toxin. With DMT410, we believe botulinum toxin may be applied topically to penetrate the skin into the dermis without the need for multiple injections.

We recently completed an open-label, ten (10) patient, Phase 1b POC trial of DMT410 for the treatment of multiple aesthetic skin conditions ( pore size, Global Aesthetic Improvement, brightness, luminosity, sebum production, fine lines under the eye, glabellar lines, forehead lines, and lateral canthal lines. In our Phase 1b POC trial of DMT410, patients received one treatment of DMT410 and were evaluated every four weeks for a total duration of 16 weeks to determine DMT410’s safety and tolerability profile, effectiveness, and its duration of treatment effect. We announced top-line results in November 2021, where we observed an improvement in many of the trial’s endpoints. At week 8, 80% of patients had at least a 25% improvement in their Global Aesthetic and 60% of patients had a 25% improvement in pore size. Also at week 8, 90% of patients had at least a one-point improvement in luminosity and 60% of patients had at least a one-point improvement in brightness. These physicians graded results were supported by objective analysis provided by Canfield Scientific’s VISIA and PRIMOS visual analysis camera systems.  Based on these results, we are actively seeking a partner with a botulinum toxin to continue development of DMT410 in a larger placebo-controlled Phase 2 trial where we can study multiple doses of botulinum toxin applied to the entire face. We believe these results, combined with our results in hyperhidrosis, further demonstrate how DMT410’s combination regimen could greatly expand the potential indications for botulinum toxins for aesthetic skin conditions, as well as other dermatologic skin diseases such as hyperhidrosis, acne, or rosacea.

There can be no assurance that DMT410 will receive FDA approval for any of the foregoing indications.

Our Strategy

We plan on in-licensing, developing and commercializing differentiated medical and aesthetic dermatology product candidates for the treatment of various skin diseases and conditions, which we believe have significant unmet needs in the market. The key components of this strategy are as follows:

The dates reflected in the foregoing are estimates only, and there can be no assurances that the events included will be completed on the anticipated timeline presented, or at all. Further, there can be no assurance that we will be successful in the development of DMT310 or DMT410, or any other product candidate we may develop in the future, or that DMT310 or DMT410, or any other product candidate we may develop in the future, will receive FDA approval for any indication.

Dermatology Market Overview

We are currently focused on the medical and aesthetics dermatology markets, which include multiple common and undertreated skin diseases and conditions such as acne, rosacea, psoriasis, hyperhidrosis, and multiple aesthetic conditions, some with no currently approved products, including the reduction of fine lines, pore size, sebum production and improvement in luminosity and overall skin quality. We believe these diseases and conditions cause significant negative impacts on patients’ quality of life, including physical and emotional trauma and social stigmatism, causing patients to constantly seek better treatment options to help alleviate their conditions. We also believe these markets have not experienced the same level of development and advances as other markets, as there have been few novel or innovative topical products recently approved other than reformulations or combinations of existing compounds. We believe our product candidates will be well situated within the market and offer the innovative solutions to the underserved medical and aesthetic dermatology markets.

The U.S. medical dermatology market has experienced significant growth in recent years based on the new treatment options and greater patient access to care. Based on current market data, the U.S. medical dermatology market (excluding biologics) was valued at over $16 billion dollars in prescription pharmaceutical sales in 2020.

The American Society of Plastic Surgeons estimates that over 15.4 million cosmetic procedures were performed in the U.S. in 2016, of which about 7 million used botulinum toxin. There are many factors that continue to drive growth in the aesthetics dermatology market such as greater patient acceptance, including from an increase in younger patients, and the discretionary cash that patients are willing to spend on aesthetic care. We also believe patients have a growing willingness to pay out-of-pocket for effective skin treatments in achieve their desired personal aesthetic look, which further supports the demand and pricing in those markets.

Based on the foregoing, we believe the dermatology market, both aesthetics and medical, offers a low-cost commercialization opportunity compared to many other prescription based specialty markets, due to the relatively small number of specialists in the dermatology field. According to the American Academy of Dermatology, in 2020 there were approximately 18,000 dermatologists in the U.S. We plan to target a subset of these dermatologists, who are larger prescribers of competitive products and who treat a large percentage of patients with our approved indications by creating a targeted sales force, to cover a significant portion of our target physicians. We believe the combination of a prescription based and cash-pay based product lines is an attractive business opportunity, as it incorporates multiple aspects of the dermatology market that move independent of the greater healthcare market.

Background of Our Spongilla Technology

Spongilla Lacustris Overview

Spongilla lacustris, or Spongilla, is a freshwater sponge from the Spongillidea family that grows in freshwater rivers and lakes in commercial quantities in select regions of the world. It becomes dormant during the winter months and regrows each year to growth forms ranging from encrusting, to digitate, to branched, depending on its habitat’s growth conditions. While it grows in many parts of the northern hemisphere, there are only certain locations where it grows in the quantities and of the quality to viably support a commercial pharmaceutical product. One such location is the Volga River in central Russia, where we have signed an exclusive supply agreement with one of the larger known suppliers of Spongilla raw material for DMT310, which guarantees our supply of Spongilla raw material. Traditionally, locals would harvest small amounts of Spongilla for its perceived medicinal properties and use it as a folk medicine to treat a variety of inflammatory conditions, including arthritis. Over the last 18 years, our exclusive supplier has refined its harvesting methods and procedures and is now capable of supplying a high quality raw material. Our supplier has the capacity to collect and process large quantities of Spongilla per year. We believe our supplier will be able to supply a raw material in the quantities and of the quality necessary to support our clinical and commercial needs.

The traditional use of Spongilla in Russia has provided a large amount of safety data. In 2003, the Russian Ministry of Health indicated that Spongilla has been used by over one million people per year, with few reported safety issues. In 2017, we submitted this safety information, along with various other publications and non-clinical studies, in an Investigational New Drug, or IND, application to the FDA’s Division of Dermatology and Dental Products with reference to the FDA’s Botanical Drug Development Guidance for Industry, or Botanical Guidance. This submission enabled the FDA to approve our IND for DMT310, allowing us to proceed directly into a Phase 2 clinical trial in patients due in part to historical human exposure. While we are still required to complete a majority of required non-clinical and pharmacokinetic studies, we were able to strategically conserve resources while gathering human clinical efficacy and safety data prior to beginning such work.

Spongilla’s Multiple Mechanism of Actions

The unique properties of Spongilla lacustris not only allows us to reference the FDA’s Botanical Guidance, but also helps ensure the regrowth of sufficient supply of raw material each year. While Spongilla is technically a part of the animal kingdom, it grows and acts more similarly to a plant in that it can completely regenerate every year, even in harsh environmental conditions. In addition to causing a regrowth of the sponge each year, the harsh environmental conditions the sponge lives in helps contribute to our Spongilla technologies’ multiple mechanisms of actions. Based on knowledge gained from over almost 18 years of harvesting Spongilla, our supplier has learned the necessary environmental conditions and Spongilla characteristics that must be present for optimal raw material harvest and to ensure the raw material contains the necessary properties for an effective pharmaceutical product. These properties include both mechanical and chemical components that are a naturally occurring part of the sponge raw material and contribute to our Spongilla technology’s mechanisms of action in the treatment of skin diseases and conditions.

The mechanical components of DMT310 come from the Spongilla’s skeletal structure, which is made up of siliceous spicules that are bound together by organic material, as seen in Image 2 below. These spicules are smooth, rod-like shapes which come to a point on each end, and if the Spongilla is harvested under certain proprietary environmental conditions, the spicules can average between 150-300 micrometers in length and about 10-15 micrometers in diameter. While there are other types of freshwater and marine sponges, many of their spicules can be covered in barbs or hooks which we believe would get stuck in the skin or are blunt on each end, making skin penetration difficult.

Image 2: Siliceous Spicules Present in Spongilla

After harvesting and further processing in the U.S., the shape and size of our spicules make them the ideal mechanism to penetrate the stratum corneum, the skins barrier, and temporarily create a micro-channel into the dermis without penetrating into subcutaneous tissue, where the larger blood vessels are located. These newly created microchannels temporarily open the skin’s barrier to allow for the targeted delivery of large and small chemical compounds into the dermis. Most topically applied products currently contain various penetration enhancers that help force the active molecule through the stratum corneum and into the dermis, such as Dimethyl Sulfoxide (DMSO). However, these penetration enhancers are only able to help smaller molecules penetrate and are usually unable to aid larger molecules, such as botulinum toxin, in topical delivery. These penetration enhancers can also cause unwanted side effects such as dry skin or garlic like taste, breath, and body odor. We believe our Spongilla technology is differentiated by enabling the delivery of both small and large molecules through topical application with less irritation and side effects than other topically applied products.

In addition to creating many microchannels in the skin, we believe the penetration of the spicules can open closed comedones, allowing oxygen into the anaerobic environment of the clogged pilosebaceous glands, where C.acnes and other bacteria survive. Lastly, we believe the spicules promote collagen production within the skin which accelerates the skin’s rejuvenation period, thus bringing refreshed skin to the surface at a quicker rate than the skins normal turnover cycle. Typically, the skin takes between three to four weeks to bring a new layer to the surface, while we believe our Spongilla technology may allow this process to complete in less than one week. We believe this decreases the time to treat inflammatory skin diseases and conditions while also enhancing the look of a patient’s skin.

Our Spongilla technology also contains multiple active chemical compounds that we believe may aid in our product candidates’ treatment of multiple dermatology skin diseases and conditions. We believe part of Spongilla’s natural defense mechanism is the creation of organic material to fight off natural enemies present in the water in which it grows. This organic material binds its spicules together to form the skeletal structure of the sponge. Based on multiple in-vitro studies, we believe the organic compounds within the sponge, when separated from the spicules, have both anti-inflammatory and antimicrobial properties. We have observed anti-inflammatory activity including reduction of C. acnes, stimulated IL-8 production, and the downregulation of the production of IL-17A and IL-17F in human cell lines. Additionally, in our in-vitro studies, we observed the inhibition of lipogenesis of sebocytes, which may translate to a reduction in sebum production and oiliness of the skin in patients.

While we believe each of the mechanical or chemical components of our Spongilla technology may be beneficial in treating various diseases, we believe the impact of each mechanism may be greatly enhanced when combined with the other. The large number spicules contained in each treatment create many microchannels through the stratum corneum, allowing for sufficient penetration and delivery of the chemical components into the treatment area to fight inflammation and bacteria.

FDA Botanical Drug Development Guidance for Industry

Most currently approved topical dermatology products are reviewed solely by the FDA’s Office of Dermatology and Dental Products and follow a standard approval pathway. However, due to our lead product candidate, DMT310, being derived from a natural source, it will be reviewed by the FDA Office of Dermatology and Dental Products with input from the FDA Botanical Review Division. While Spongilla is not a botanical, the FDA has allowed us to reference the Botanical Guidance for raw material quality control and batch to batch consistency through development and into commercialization. We believe our ability to reference the Botanical Guidance and receive input from the Botanical Review Division on DMT310 provides us with key advantages in DMT310’s regulatory pathway to approval, if achieved. These advantages include being able to move into human clinical studies upon the FDA’s acknowledged receipt of our IND letter and subsequent study may proceed, saving us substantial financial resources to achieve human clinical data. Additionally, while we believe that our sponge contains multiple active chemical compounds, based on our regulatory analysis of the feedback from the FDA and the Botanical Guidance, we believe we are only required to provide identifiable and quantifiable active components to show quality control and batch to batch consistency. We believe this will make it more difficult for potential competitors to replicate DMT310 due to their inability to know every component of our product candidate and to show their product is similar in its composition. Thus, we believe a competitor with a similar product or product candidate would have to follow all the manufacturing, development, and regulatory steps we must complete for approval. However, there can be no assurance that we successfully navigate the development of DMT310 or that DMT310 will receive FDA approval.

Our Product Candidates

DMT310

Our lead product candidate, DMT310, is a unique, once weekly, naturally derived topical product, first being developed for the treatment of moderate-to-severe acne vulgaris, or acne. It is derived from freshwater Spongilla lacustris, or Spongilla, which grows under certain environmental conditions in select locations throughout the northern hemisphere. Our Spongilla raw material is harvested by our exclusive partner in Russia abiding by strict protocols which our supplier has developed over 18 years. The result of these strict protocols is a consistent chemical structure that is reproducible year after year, which is critical in producing a material able to be used in a pharmaceutical product. After harvesting, the Spongilla is shipped to our manufacturing facility in the U.S. for further processing into a uniform powder before being packaged into sachets. Immediately prior to treatment the patient will mix the powder with a diluent (hydrogen peroxide) to form a paste which the patient can then apply to the treatment area to treat the multiple facets of their disease. DMT310 utilizes the Spongilla’s mechanical spicules to help resurface a patient’s skin while also creating microchannels through the stratum corneum to allow the penetration of the Spongilla’s naturally created organic compounds to help treat various skin diseases. We believe these organic compounds can travel through the newly created microchannels into the dermis and sebaceous gland where both inflammatory and non-inflammatory acne lesions originate. DMT310 targets treatment of the multiple facets of acne by combining the substantial mechanical and chemical activity of Spongilla into an easy to apply product that only needs to be applied once weekly. If approved by the FDA, we believe the combination of the mechanical and chemical properties of DMT310 has the potential for a more rapid time to treatment effect with fewer treatments, less side effects and better tolerability than other currently marketed topical acne products.

DMT310 for Treatment of Acne Vulgaris

Market Opportunity. Acne is characterized by areas of scaly red skin, non-inflammatory blackheads and whiteheads, inflammatory lesions, papules, and pustules and occasionally cysts and scarring that occur on the face, neck, chest, back, shoulders, and upper arms. It affects approximately 50 million people in the U.S., with about 85% of teenagers experiencing some form of acne. The U.S. prescription acne market had approximately $2.3 billion in prescription pharmaceutical sales in 2019, according to IQVIA Inc. market data.

Most patients experience some form of acne during their teenage years and for some, their acne may diminish over time, or at least tends to decrease by age 25. There is, however, no way to predict how long it will take for acne to disappear entirely, with some individuals suffering from acne well into their 30s, 40s and beyond. While not life-threatening, acne causes significant trauma for those suffering from it due to social stigmas, substantial risk of permanent facial scarring, lowered self-esteem and social withdrawal. Therefore, we believe early and aggressive treatment with an effective once weekly product may lessen the overall long-term impact of this disease and may lead to an increase in a patient’s quality of life.

Due to acne’s negative impact on a patient’s quality of life and negative impact on facial aesthetic, patients suffering from acne tend to be highly motivated to treat their acne and we believe more willing to pay more out-of-pocket for higher priced and highly effective treatments. It is our belief that patients seeking an easy to use and effective topical product will tolerate less favorable reimbursement rates than for other prescription products for other indications, allowing for favorable pricing if we are able to eventually obtain approval for and successfully commercialize DMT310 for acne. Furthermore, if approved, we believe that DMT310’s natural characteristics may allow us to expand our addressable acne market to include those patients who value using naturally derived products, such as DMT310.

The acne market can be broken into three separate classes based on the severity of the acne:

Limitations of Current Standard of Care. While current treatment options may be effective for some patients, there are many limitations and drawbacks of current acne products which cause poor patient adherence. All currently approved topical therapies for the treatment of acne must be applied once or twice a day to allow an accumulation of product within the skin to effectively treat the disease. This requirement to apply multiple times per day becomes very onerous and time consuming for patients, causing many patients to fail to comply with the strict application regimen and/or skip multiple treatments. Proper use and application schedules are particularly important for topical acne products and poor patient adherence may lead to reduced treatment effect and ultimately discontinuation of treatment due to lack of effect.

Many current acne products, such as retinoids, must be applied at least once-a-day and may cause significant stinging, burning, and peeling after each application. These tolerability issues, which may start occurring after the first application, and the substantial discomfort they cause, lead many patients to discontinue the necessary daily application schedule. It is well known that benzoyl peroxide, or BPO, leads to drying of the skin and that retinoids result in many local skin reactions including erythema, burning, and peeling, after the first treatment. It has been observed in the combination study of adapalene/BPO, where more than 20% of the subjects reported moderate or severe erythema and stinging/burning.

Lastly, most topical products have an unavoidable latency period of 6-8 weeks until patients have a definite improvement. This means they may have to endure 30 to 60 applications before observing that their acne is improving (assuming a daily, or twice daily regimen), all while dealing with the burning, stinging, and peeling that may accompany these topical products. We believe that teenagers, who make up the largest segment of the acne market, become impatient with the lack of rapid perceived effect leading to premature discontinuation of treatment. The lack of rapid treatment effect, side effects, and onerous application schedules all greatly contribute to patient compliance issues and could ultimately lead to treatment failure. We believe patients are more concerned with efficacy outcomes than costs, thus we believe patients will be more willing to pay higher out of pocket costs.

Our Solution for Moderate-to-Severe Acne. If approved, we believe DMT310’s once weekly application regimen will increase patient compliance, potentially increasing the likelihood of improved acne results. Using our multifaceted, once weekly Spongilla treatment technology, we are developing DMT310 to create a paradigm shift in how acne is treated by dermatologists by attempting to make DMT310 the preferred treatment option for all acne patients. We have designed DMT310 to treat the multiple factors of acne while also attempting to increase patient compliance.

If approved, we believe DMT310 has the potential to remedy many of the negative characteristics associated with current topical therapies for moderate-to-severe acne vulgaris, including cumbersome treatment regimens, negative side effects (including burning, stinging, itching or dryness, which may occur as early as the first treatment and continue daily thereafter), and delayed time to effectiveness (which may take up to eight weeks). DMT310 is designed to be applied only once a week, rather than once or twice a day. We believe a once weekly schedule may be conducive to high patient compliance. In addition, in our recent Phase 2b acne trial, on average, patients experienced an approximately 45% reduction in inflammatory acne lesions after just four treatments, with continued improvement of up to 62% reduction at 12 weeks. Further, approximately 90% of patients had no, or mild, tolerability issues at the end of the 12-week trial and no patients experienced any severe tolerability issues.

In addition, in our Phase 2b trial we observed that DMT310 started showing a statistically significant difference from placebo after just four treatments while also having a rapid reduction on inflammatory and non-inflammatory lesions. We believe this rapid visible response encouraged patients to continue to adhere to the once weekly application schedule leading to a continued reduction in their lesions until the end of trial at week 12. Thus, we believe that a topical product that needs to be applied only once weekly with a quicker time to perceived treatment effect and fewer tolerability issues has the opportunity to exhibit greater treatment success due to improved patient adherence leading to loyal and repeat users.

DMT310 for the Treatment of Mild-to-Moderate Psoriasis

We believe that DMT310 could also be an effective treatment for mild-to-moderate psoriasis based on the data received from our recently completed Phase 1b POC trial and the in-vitro effect seen on the down regulation of IL-17A and IL-17F, as well as its ease of application to mild-to-moderate psoriatic lesions with smaller surface areas.

Psoriasis is characterized by “plaques,” or raised red areas of skin covered with a silver or white layer of dead skin cells referred to as “scales.” Psoriatic plaques can appear on any area of the body, but most often appear on the scalp, knees, elbows, trunk, and limbs, and the plaques are often itchy and sometimes painful. The psoriasis lesions are characterized by hyperproliferation of keratinocytes and a lymphocyte-rich infiltrate consisting primarily of T cells. In the dermis and epidermis, T lymphocytes interact with antigen-presenting cells and secrete Th1 and Th17 cytokines. These activated T cells and the inflammatory cytokines they secrete are believed to induce the skin lesions seen in psoriasis. In addition to the broad anti-inflammatory properties, we have observed in our clinical acne studies, DMT310’s ability exhibited in-vitro a dose dependent inhibition of both IL-17A and IL-17F, key cytokines implicated in the pathogenesis of psoriasis. Thus, DMT310 may provide a method to topically deliver targeted anti-inflammatory therapy directly to psoriatic lesions with good local tolerability in an easy to apply regimen.

Market Opportunity. Patients are either underdiagnosed, undertreated or left untreated. This leaves patients seeking new treatment options. Psoriasis is a chronic, inflammatory skin disorder estimated to affect up to 3.2% of the world’s population with global sales of $14.2 billion in 2020, which is projected to increase to $27.5 billion by 2030. Plaque-type psoriasis is the most common form of psoriasis, occurring in more than 80-90% of cases of psoriasis with approximately 80% of patients experiencing the mild disease form and 20% experiencing moderate-to-severe form of the disease. In addition to the disfigurement caused by psoriatic lesions, patients also may experience pruritus, or itching, which can be particularly common and bothersome for patients. Not only does psoriasis cause direct clinical challenges, but patients also suffer a negative impact on their quality of life. Patients can suffer substantial psychological impacts from their disease, including, social stigmas, feelings of rejections and shame, discrimination in the workplace, and reduced productivity, among many others. These patients are commonly looking for a safe and effective product to treat their disease.

Limitations of Current Standard of Care. Most of the available therapies target moderate-to-severe disease, meaning that mild patients are undertreated with one in five not being happy with their current treatments. The treatments for mild psoriasis patients are mostly generic, but are often inadequate to control a patient’s disease. Mild psoriasis patients are first treated with topical therapies due to the reduced systemic exposure. However, patients often feel that topical treatments are one of the negative aspects of psoriasis, which we believe is partly due to the limited options available like, coal tar, retinoids, calcineurin inhibitors and corticosteroids. While topical steroids are a very common treatment, drawbacks include being able to be used only for a short period of time and are associated with Hypothalamic pituitary adrena axis suppression, skin atrophy (thinning), striae (stretch marks), and telangiectasia (spider veins), among other side effects. Furthermore, some of these side effects are irreversible, persisting even after therapy is discontinued. Consequently, high-potency topical steroids are not recommended for chronic use and physicians generally will not prescribe them for treatment on the face. Also, rebound is a known challenge with steroids, where after steroid discontinuation, the psoriasis returns even worse than it was before steroid treatment was initiated.

While biologic therapies, including drugs such as Enbrel, Cosentyx, Humira, and Stelara, are available for treatment of psoriasis, their use remains highly restricted to patients with moderate-to-severe disease. In the U.S., with less than 20% of patients having moderate-to-severe psoriasis, we believe a vast majority of the psoriasis market are left without long-term effective treatment options. While additional data has caused an uptake of biologics, they remain limited due to multiple factors, including being indicated only for use in moderate-to-severe patients, high costs, consequent reimbursement and access restrictions, frequent high patient co-pays, perceived risk of side effects, and patient fear of injection. Additionally, we believe there is room for topical products that treat mild psoriasis to be priced at a premium compared to other topical products for other inflammatory skin diseases like acne. This is based on fact that when comparing the cost of biologic therapy, which can cost $50,000 per year, an effective and safe topical product for mild psoriasis could have a large impact on the market. Therefore, we believe physicians would be more likely to prescribe a topical product for psoriasis long before biologic treatment, and patients experiencing milder psoriasis would prefer using a topical product over a systemic treatment.

Non-biologic systemic therapy options for psoriasis exist, but their use is also limited due to unfavorable side effects. Apremilast (Otezla), an oral PDE4 inhibitor, generated more than $1 billion in sales in all indications in 2019, but has only achieved a small patient share in psoriasis due to limitations on its use to moderate-to-severe patients, its modest symptomatic improvement, and frequent adverse events. We believe there is still a great need to bring to market a product that addresses mild-to-moderate psoriasis.

Due to the shortcomings of existing topical therapies and the lack of options providing robust symptomatic improvement with chronic treatment, especially in the last 25 years, we believe there remains a need for a safe, effective, and easily applicable topical treatment for chronic disease, that has a low risk of side effects, is well tolerated, and can be easily applied on all anatomical areas.

Our solution for Mild-to-Moderate Psoriasis. Similar to the needs of patients with acne, we believe patients suffering with psoriasis might comply better with a treatment that is easy to apply and requires less application time than current treatment options. DMT310, if approved, could be used as a first line therapy for patients with mild-to-moderate psoriasis. We believe the spicules within DMT310 will help break up the psoriatic lesions, while the anti-inflammatory components of DMT310 assist with the healing of the lesions. Due to the historical use of Spongilla and the human safety data collected to date in our clinical studies, we believe DMT310 may be suitable for long term treatment of chronic psoriasis due to its unique treatment effect and acceptable safety and tolerability profile.

In addition to the mechanical effects of DMT310, extracts of the organic material have shown in-vitro to have a dose dependent inhibition of IL-17A and IL-17F secretion. In the dermis and epidermis, T lymphocytes interact with antigen-presenting cells and secrete Th1 and Th17 cytokines, including interferon-gamma (IFN-g), interleukin (IL)-2, IL-17, IL-22, and tumor necrosis factor alpha (TNF-α). These activated T cells and the inflammatory cytokines they secrete are believed to induce the skin lesions seen in psoriasis and be a fundamental contributor in the disease’s immune pathway. We know that there are multiple approved IL-17A inhibitors on the market, such as secukinumab (Cosentyx®, Novartis) and ixekizumab (Taltz®, Eli Lilly and Co.), but these are both biologics and only indicated for patients with moderate-to-severe psoriasis who are candidates for systemic therapy. The limited patient population who are candidates for these biologic treatments is a small percentage of the overall psoriasis market. Therefore, a topical product that can inhibit the IL-17 pathway in the skin with minimal systemic exposure would be an ideal option for both physicians and patients.

Based on clinical and non-clinical data generated to date for DMT310, and anecdotal evidence of DMT310’s effect on psoriatic lesions, we completed a Phase 1b, open label, POC study in mild-to-moderate psoriasis patients in October 2021. This trial included once weekly treatments of DMT310 for 12 weeks in 30 mild-to-moderate psoriasis patients with lesions covering 2% to 30% of their body surface area. The primary endpoints in this trial were the Physician’s Global Assessment, which is a 6-point scale measuring the physician’s assessment of psoriasis severity of the target lesion site, the Psoriasis Area Severity Index scale is also a 6-point scale measuring the psoriatic disease severity taking into account qualitative lesion characteristics (erythema, thickness, and scaling) and degree of surface area involvement and the Pruritus Visual Analog Scale consists of the patient’s measurement of pruritus, or itch, in addition to normal tolerability and safety assessments. We announced top-line results in October 2021, and based on the efficacy, safety and tolerability profile seen in the POC trial we initiated additional work to better inform the clinical trial design prior to moving into a larger Phase 2, placebo-controlled, clinical trial, which is anticipated to begin in 2022.

DMT310 for the Treatment of Moderate-to-Severe Rosacea

Based on the positive clinical data we observed against inflammatory lesions in our Phase 2b acne trial and the many similarities between acne vulgaris and papulopustular rosacea, we are also developing our DMT310 product for the treatment of papulopustular rosacea, or rosacea. We believe the broad anti-inflammatory results seen by DMT310 in clinical trials for acne may also be seen in papulopustular rosacea patients, as it is also a disease of papules and pustules, which are inflammatory lesions on the face. We believe there currently remains a high unmet need in rosacea for a safe and effective treatment and we believe a once weekly, naturally derived topical product could be an ideal candidate to fill this void. Thus, in November 2021, we started enrolling moderate-to-severe rosacea patients in a Phase 2 trial of the once weekly treatment of DMT310. We expect to have top-line results in the second half of 2022.

Market Opportunity. Rosacea is a chronic, inflammatory skin disorder characterized by repeated remissions and exacerbations of facial redness and inflammatory lesions that can be challenging to treat. The pathogenesis of rosacea is not completely understood, but factors such as microbial overgrowth, vascular abnormalities, and abnormally high levels of cathelicidin in the skin have been suggested to be involved. Rosacea is further divided into four subtypes: erythematotelangiectatic, papulopustular, rhinophymatous, and ocular, with many patients having a combination of the various subtypes.

There are over 16 million patients diagnosed with one or more forms of rosacea in the U.S. and it typically affects women, although more severe forms tend to affect men due lack of treatment. Depending on the presenting symptoms and their severity, treatment ranges from oral antibiotics to topical preparations including brimonidine, oxymetazoline, azelaic acid and others, all with substandard efficacy and associated side effects including stinging and burning, pruritus, as well as dryness and erythema. These issues with current treatment options can often lead to discontinuation of treatment and a prolongation of symptoms and patients suffering. Even with such drawbacks to current therapies, current topical products most commonly used to treat rosacea generate approximately $374 million in aggregate annual revenues in the U.S. in 2019, while the oral drugs typically prescribed for more severe cases are oral antibiotics and generate about $305 million in aggregate annual revenues in the U.S. in 2019 according to IQVIA Inc. market data.

Current rosacea treatments have some of the same limitations and compliance issues as current acne products, like cumbersome applications regimens and unwanted side effects. We believe this creates a large opportunity in the market for products that are easy to apply, such as DMT310.

Limitations of Current Standard of Care. Since rosacea is a complex chronic disease combination therapy is typically required. Current topical treatment options for rosacea must be applied once or twice a day, and rosacea can have a significant impact on a patient’s quality of life due both to the unwanted cosmetic appearance of the disease and intolerable and painful symptoms associated with the disease. Moreover, with a once or twice a day application schedule, patients may experience side effects (such as dryness, stinging, burning, irritation and pruritis) after each treatment, resulting in poor patient compliance. Like acne, compliance with a product’s application regimen is critical in the treatment success of rosacea, especially because rosacea tends to intensify in the presence of certain environmental triggers. If left untreated, the hypertrophied tissue may require surgery to reshape and debulk the excess tissue. Despite the negative impact of the disease, very few rosacea patients seek treatment. We believe this is due to the limited treatment options available for these patients. Therefore, we believe an easy to apply once weekly treatment with minimal side effects and good tolerability could help alleviate some of the drawbacks with the current standard of care.

Our Solution for Moderate-to-Severe Rosacea. Like the needs of patients with acne, based on a recent survey of rosacea patients, many indicated a low level of satisfaction with current treatment options leading to intermittent use of current therapies. We believe that a once weekly product derived from a natural source that effectively treats the inflammation associated with papulopustular rosacea may be the ideal solution for patients suffering from this disease. The formation of rosacea lesions is thought to be driven by early recruitment of TH1 and TH17 lymphocytes which ultimately causes neutrophil infiltration and lesion formation. Once the T-cells arrive to area, T cell derived cytokines such as IL-17 may, together with UV radiation, activate keratinocytes to produce the chemokines CXCL1 and CXCL8 and these chemokine cause neutrophils to migrate to the area, leading to the formation of inflammatory lesions. TH17 cells preferentially express the chemokine receptor CCR6, and its specific ligand CCL20 is upregulated by UVB irradiation stimulation in keratinocytes. This stimulation of the immune response by UV radiation may explain why sunlight exposure and IL-17 may exacerbate the lesions of rosacea.

In addition to the promotion of neutrophil infiltration, IL-17 also promotes angiogenesis via the induction of VEGF, producing erythema and subsequent telangiectasia. Based on in-vitro data, DMT310 has shown a dose dependent inhibition of IL-17A and IL-17F along with potent anti-inflammatory properties seen in our Phase 2b acne trial. We believe the combination of these features, coupled with a once weekly application schedule, could allow for DMT310 to be a leading treatment option for patients suffering with rosacea.

We recently enrolled our first patients in a Phase 2 clinical trial of DMT310 for the treatment of moderate-to-severe rosacea in November 2021. This trial will enroll approximately 180 patients across the U.S., where patients will be treated once weekly with a topical application of either DMT310 or placebo. Patients will be followed for 12 weeks, and the primary endpoints will include Investigator’s Global Assessment and inflammatory lesion counts along with tolerability and safety assessments. Conditioned upon the receipt of positive data from this Phase 2 trial, which we expect in the second half of 2022, we plan to hold an End of Phase 2 meeting with the FDA in the second half of 2023 and then plan to initiate a Phase 3 program to prepare for an NDA submission. We expect to initiate the Phase 3 program in 2024. We will leverage the nonclinical studies completed for our acne program to help support the NDA submission for rosacea. There can be no assurance that DMT310 will receive FDA approval in rosacea.

DMT400 for the Topical Delivery of Macromolecules

DMT400 is our combination treatment regimen that utilizes the unique mechanical features of our Spongilla technology to facilitate the intradermal delivery of macromolecules, such as botulinum toxin, monoclonal antibodies or dermal fillers, by topical application rather than with injections. These macromolecules are highly effective and approved for the treatment of multiple medical and aesthetic skin conditions and diseases, but currently are not approved in a topical form because the molecular structures are too large to penetrate the stratum corneum, the skin’s outermost defense barrier. Thus, all current macromolecule treatment options for skin conditions and diseases must be injected, sometimes requiring numerous injections. We believe that DMT400’s topical application regimen may provide patients with a topical treatment option for both medical and aesthetic dermatology conditions using products previously unavailable to them in a topical treatment.

DMT400 works by first topically applying our proprietary sponge powder to the treatment area wherein the mechanical spicules of the sponge penetrate the skin thereby creating microchannels into the dermis. Unlike a derma roller or other microneedle technology, our unique spicules remain in the skin for one to two days allowing the microchannel to remain open rather than close, as they would after using a derma roller, during which time a macromolecule can be applied topically to the skin. We believe this topical application of a macromolecule can be massaged into the newly created microchannels thereby facilitating the delivery of the macromolecule, through the microchannel and into the dermis, without the need for injections. This targeted delivery to the dermis rather than delivery to the systemic circulation, may decrease the systemic spread of these macromolecules thus potentially reducing side effects seen with injections, while increasing targeted application to where the disease resides.

DMT410 for the Treatment of Primary Axillary Hyperhidrosis

We initially tested our DMT400 treatment with our DMT410 program, which consists of a topical application of our proprietary sponge powder followed by a topical application of botulinum toxin. DMT410 was initially tested in a Phase 1b POC trial of ten (10) patients with primary axillary hyperhidrosis to determine if our Spongilla sponge powder could successfully facilitate the intradermal delivery of botulinum toxin and potentially other macromolecules. Based on the results seen from this study we believe we were successful in delivering active botulinum toxin to the dermis for the treatment of hyperhidrosis.

Market Opportunity. Hyperhidrosis is a life-altering disorder of excessive sweating out of proportion with thermoregulatory requirements. While many patients may exhibit this excessive sweating in response to specific triggers, such as emotional stress, others may exhibit symptoms spontaneously. Typically, the diagnosis of hyperhidrosis is based partly on subjective measures that measure how the excessive sweating affects a patient’s quality of life. Physicians also gravimetrically measure the amount of sweat produced, though there is no standardized threshold which defines hyperhidrosis. It is believed to affect an estimated 15 million people in the U.S. alone. According to a 2016 update on the prevalence and severity of hyperhidrosis in the U.S., axillary (underarm) hyperhidrosis, is the most common form of the disorder. However, patients are affected by other forms like palmar (hands) and plantar (feet) hyperhidrosis, which we believe DMT410 may be able to treat and avoid the side effects seen in studies of poor administration of intradermal injections.

Limitations of Current Standards of Care. While the prevalence of hyperhidrosis is significant, treatment options are limited, and many come with unwanted side effects making patient acceptance low. Typical first line therapy is usually with aluminum chloride-based antiperspirants, but many have potential drawbacks. First, daily applications can be time consuming leading to poor compliance among patients. Second, many antiperspirants are irritating to the skin leading to treatment discontinuation. Lastly, topical aluminum chloride treatment has a transient duration of effect and requires frequent reapplication to maintain sweat control. More recently, topical anticholinergics have been investigated by companies such as Brickell Biotech, Inc. and Journey Medical Corporation (formerly developed by Dermira, Inc.), but we believe they tend to have the same side effects as systemic anticholinergics which are used off-label. These side effects include dry mouth, dry eyes, blurred vision, headache, urinary retention, among others. The unwanted side effects are often so intolerable that up to one third of patients are forced to withdraw from treatment. If topical or systemic treatments fail, then patients can get intradermal injections of botulinum toxin which has been shown to have a great treatment effect, but treatment is very technique driven, requiring a trained physician to administer the toxin to the thin layer of the dermis. Many times, poor treatment response with botulinum toxin is due to incorrect or insufficient dosing or incorrect administration. Patients may also experience injection site pain or discomfort, which may be accompanied by swelling and bruising. However, for the treatment of palmar hyperhidrosis with intradermal injections of botulinum toxin, the most notable adverse event is transient hand weakness, if administered incorrectly. As a last resort, patients may also seek surgery to treat their hyperhidrosis, if less invasive treatment options fail. While there are treatment options available for hyperhidrosis patients, only about half of affected individuals seek treatment due to social embarrassment associated with the diagnosis of the disease. We believe this leaves a wide gap in the market for a product that combines the efficacy of botulinum toxin with the safety and tolerability profile of topical therapies. We believe DMT410, if successfully commercialized, could address this market opportunity.

Our Solution for Primary Axillary Hyperhidrosis. While primary axillary hyperhidrosis is idiopathic, the mechanism is thought to be neurogenic overactivity of the eccrine (sweat) glands in the affected area. Based on the summary basis for approval of BOTOX, we know that botulinum toxin type A has a clinical effect on hyperhidrosis, which acts by disrupting sympathetic stimulation to the eccrine glands resulting in considerably reduced axillary sweating from four to 12 months. Based on the package insert for BOTOX, intradermal injections of 50 units of BOTOX saw a greater than 50% decrease in axillary sweat production in 81% and 41% of patients treated with BOTOX or placebo, respectively, at four weeks. While intradermal injections of botulinum toxin appear to be very effective, the treatment requires multiple injections into each axilla, which is time consuming for the treating physician and administration is very technique sensitive due to the thin nature of the dermis. Additionally, given the nature of the target tissue being more sensitive, and the number of injections required, it is believed that injection site pain is a major cause for the lack of compliance. Thus, we believe a topical application regimen, capable of penetrating the stratum corneum to deliver botulinum toxin into the dermis, may be able to exhibit similar efficacy with greater compliance and adoption. In a Phase 1b POC study of DMT410 for the treatment of axillary hyperhidrosis, we saw a greater than 50% decrease in axillary sweat production in 80% of patients at week four. This result supports our belief that topical application of botulinum toxin via our Spongilla technology to the dermis could be a viable alternative to intradermal injections. If approved, DMT410 could eliminate the need for intradermal injections of botulinum toxin. Therefore, we believe DMT410 could potentially be a favorable treatment option for patients suffering with primary axillary hyperhidrosis. Additionally, we also believe that DMT410 may be an effective treatment for palmar or plantar hyperhidrosis due to DMT410’s delivery of botulinum toxin to the dermis without the risk of distance spread of toxin to the muscle as with intradermal injections of botulinum toxin. DMT410 could limit the side effects seen with intradermal injections including hand weakness and administration pain. There can be no assurance that DMT410 will receive FDA approval for hyperhidrosis.

DMT410 for the Treatment of Aesthetic Conditions In addition to the use of DMT410 in the treatment of hyperhidrosis and other medical dermatology conditions such as acne and rosacea, based on the data from our recent Phase 1b POC trial of DMT410 for the treatment of multiple aesthetic skin conditions such as pore size, sebum production, fine lines, luminosity, and brightness of the skin, we believe DMT410 has an opportunity to be used for the treatment of multiple aesthetic skin conditions. Botulinum toxin is known to treat a variety of aesthetic skin conditions, but to achieve these positive effects, the botulinum toxin needs to be delivered to the dermis rather than the muscle to have the desired effect. DMT410’s uniquely sized spicules create microchannels through the stratum corneum and into the dermis that are large enough for botulinum toxin to be delivered to the dermis. However, the spicules are not long enough to reach the muscle layer, which limits the potential distant spread of toxin and potential side effects. Botulinum toxin acts by blocking the release of acetylcholine into the synaptic cleft, where it binds to a cholinergic receptor, thereby inhibiting sympathetic nerve function. This ability to inhibit cholinergic transmission makes it useful to treat indications with glandular hypersecretion, like sebum production or hyperhidrosis, which are partly caused by hyperactive sympathetic nerves. For aesthetic indications, since botulinum toxin must be delivered to the dermis, intradermal injections are typically required but can require numerous injections in order to cover the larger surface area to treat these aesthetic skin conditions as compared to targeted injections to the muscle. Intradermal injections can also be difficult to effectively administer, and may be painful for patients. This tends to lead to poor adoption of this therapy, which is why we believe there are currently no approved aesthetic indications utilizing intradermal injections. Additionally, no topical formulations of a botulinum toxin have been approved, likely due to the size of the molecule and its difficulty in penetrating the stratum corneum to reach the dermis. Therefore, with no currently approved intradermal injections or topical applications methods of botulinum toxin for aesthetic skin conditions, we believe there is a large market opportunity for a product that can successfully deliver botulinum toxin by topical application into the dermis to improve a patient’s aesthetic appearance. If approved, we believe DMT410 can address this market.

Limitations of Standards of Care While injections of botulinum toxin into the muscles have been approved for many years for aesthetic treatments such as the reduction of glabellar, lateral canthal or forehead lines, there are many other aesthetic skin conditions, such as enlarged pore size, excess sebum production, fine lines, decreased luminosity, and decreased brightness that botulinum toxin has been demonstrated to improve but a botulinum toxin product, whether via intradermal injections or topical application, has yet to be approved for these indications. This may be because these aesthetic indications typically require botulinum toxin to be delivered to the dermis rather than the muscle, which due to the thin nature of the dermis, can be more difficult than injecting into the muscle. Additionally, the areas of the face requiring intradermal injections are much more sensitive and thus can be more painful for patients. These intradermal aesthetic indications typically require a wider dispersion of botulinum toxin to be delivered to the dermis rather than the few injections into the muscle needed for the deeper facial lines. Some intradermal studies have required 25-30 intradermal injections in the face to deliver sufficient quantities of botulinum toxin to the dermis. With some patients having a fear of needles, a treatment that can avoid the use of needles would be desirable for this population. Additionally, topical application of botulinum toxin has been difficult due to the size of the molecule making it difficult for the botulinum toxin to penetrate the stratum corneum, resulting in many topical applications being ineffective and discontinued. An example is Revance’s RT001 product which did not achieve the primary or other secondary endpoints in a Phase 3 trial for the treatment of crow’s feet and therefore, Revance does not plan to continue development of this program at this time. Another botulinum toxin company, Allergan (now part of AbbVie), purchased a company in 2016 to pursue development of a topical botulinum toxin program. However, Allergan has not conducted any studies with this program. We believe most botulinum toxin companies remain interested in developing a topical means of administering botulinum toxin that is less painful, easy to apply, provides wider coverage of toxin, and limits potential distant spread of toxin, but no product has yet been successfully developed.

Our Solution for the Treatment of Aesthetic Skin Conditions We believe a product candidate like DMT410, which may be able to successfully deliver botulinum toxin to the dermis covering a larger facial area than injections, would provide a new treatment option for a variety of aesthetic skin conditions, such as reduction in pore size, sebum production, and fine lines, and improvement in skin luminosity and brightness, thus potentially expanding the market for uses of botulinum toxin beyond injections into the muscle for treatment of deep lines. We believe DMT410 may be able to provide patients with a topical treatment option without the pain and discomfort typically associated with injections of botulinum toxin. Additionally, we believe administration will be easier and less time consuming for dermatologist, making it an additional value driven treatment option they can offer. While current botulinum toxins are approved for injections into the facial muscles to treat deeper wrinkles such as glabellar lines, lateral canthal lines and forehead lines, there remain many other aesthetic conditions of the face which could greatly benefit from an intradermal administration of botulinum toxin, especially via topical application. Certain aesthetic indications such as reduction in fine lines, pore size, and sebum production, and improvement in luminosity and brightness are typically not treated with injections into the muscles but need botulinum toxin to be delivered to the dermis to have the proper effect. With DMT410’s uniquely sized spicules, we believe it can create numerous microchannels into the dermis allowing a pathway for the topical application of botulinum toxin. Once in the dermis botulinum toxin is able to act on reducing sebum production which in turn may reduce pore size and overall oiliness of the skin. Additionally, botulinum toxin has been demonstrated to have a beneficial effect on the mean volume and depth of facial lines giving the skin a smoother appearance. Therefore, we believe there may be a need for a product, such as DMT410, that can facilitate the topical application of botulinum toxin into the dermis, to treat a variety of these aesthetic skin conditions.

If approved, we believe DMT410 has the potential to expand the market for botulinum toxins’ treatment to multiple additional aesthetic skin conditions. We believe DMT410 can be an effective product at delivering bioactive botulinum toxin with a topical application for treatment of pore size, sebum production, fine lines, luminosity, brightness, overall aesthetic appearance and possibly more. We recently completed a Phase 1b POC trial of DMT410 for the treatment of multiple aesthetic skin conditions where we examined improvements in pore size, sebum product, luminosity, brightness, and Global Aesthetic improvement after one treatment of DMT410. We believe this POC trial produced data which demonstrated that DMT410 was able to deliver botulinum toxin to the dermis and showed a reduction in pore size, reduce sebum production, improved luminosity, improved brightness, and improved the patients’ Global Aesthetics. This study also produced no adverse events and provided acceptable tolerability data with only mild tolerability effects seen fifteen (15) minutes post treatment. We believe this data warrants further development of this program and we are currently seeking a partner who has a botulinum toxin they are looking to develop for aesthetic skin conditions which require delivery of botulinum toxin to the dermis. There can be no assurance that DMT410 will receive FDA approval for any aesthetic indication or that we will be able to find a partner for development.

Clinical Progress of our Lead Product Candidates

DMT310 Phase 2b Clinical Results for Acne

In June 2020, we received results from our randomized, double-blind, placebo-controlled, Phase 2b clinical trial of once weekly treatments for twelve weeks of DMT310 for acne. We enrolled 181 moderate-to-severe acne patients at fourteen (14) sites across the U.S. Patients were required to be 12 years of age or older, have at least twenty (20) non-inflammatory lesions, twenty (20) inflammatory lesions, no more than two (2) nodules or cysts and be a moderate or severe (meaning a 3 or 4) on the IGA scale of acne. The IGA scale consists of a 5-point scale, 0-4, with 0 being clear, 1 being almost clear and 4 being severe acne as graded by the treating physician. Patients were randomly divided into two treatment groups, either to receive DMT310 or placebo. Patients were required to apply the product, whether DMT310 or placebo, to the entire face, once weekly for 12 weeks with the first two weeks of treatment applied in office under the supervision of trained study staff, then the remaining 10 weekly treatments were applied at home by the patient.

The primary clinical endpoints of the trial included the absolute reduction in inflammatory lesions from baseline. The secondary clinical endpoints included:

All statistical analyses and data shown for our Phase 2b study are on the intent-to-treat, or ITT, population. The ITT population included all randomized subjects in the group to which they were randomized, regardless of study drug received or if they completed the study. The ITT approach provides an unbiased comparison among the treatment groups.

The trial was completed in June 2020 and showed a statistically significant and we believe, a clinically meaningful effect for all efficacy endpoints of the trial, namely reduction in inflammatory and non-inflammatory lesions and IGA responders. Notably, the treatment effect for all efficacy endpoints was statistically significant at the four-week mark, after only four treatments, and continued to be statistically significant for week eight and week 12 when compared with placebo. Patients saw a rapid and sustained therapeutics treatment effect in percentage change in inflammatory lesions with a 45% reduction in inflammatory lesions at week four and reached 62% reduction in inflammatory lesions at week 12 compared to 24% and 42% reduction of inflammatory lesions for placebo at weeks four and 12, respectively. The effect on non-inflammatory lesions were also statistically significant after four weeks, with the therapeutic effect of an approximately 36% reduction in non-inflammatory lesions at week four reaching a therapeutic effect of 58% at 12 weeks, which was statistically significant when compared with placebo. In addition, both inflammatory and non-inflammatory percent reduction in lesion counts had P-values of less than 0.001 at week four and week 12 when compared to placebo.

We also saw an early statistically significant separation in IGA with 15% of patients in the DMT310 group considered responders on the IGA scale, or who had an IGA score of 0, “clear,” or 1, “almost clear,” after only 4 treatments as compared with just over 2% of patients on placebo. This statistical separation continued for the remainder of the trial where at the completion of the trial, or week 12, 44% of patients in the DMT310 group, compared with 17% in the placebo group were IGA responders. This difference was statistically significant with a P-value of less than 0.001.

No reported drug-related severe adverse events were reported in the trial. The drug also appeared to be tolerable by a majority of patients with greater than 92% of patients experiencing no or mild tolerability with no severe dryness, scaling, erythema, or burning/stinging reported at week 12. Of those patients who did report tolerability issues, they also reported that the issues were usually transient and resolved quickly without intervention. Based on this data, after meeting with the FDA, we expect to proceed to Phase 3 clinical trials with the same clinical endpoints and the same formulation of DMT310 for moderate-to-severe acne.

The following diagrams and tables show the absolute reduction of inflammatory and non-inflammatory lesions from baseline until the end of study, or week 12, for both DMT310 and placebo (Image 3), and percent reduction of inflammatory and non-inflammatory lesions from baseline until end of study, or week 12, for both DMT310 and Placebo (Image 4). Although reduction in non-inflammatory lesions was a secondary endpoint of this trial, it is a required metric for the Phase 3 acne studies necessary for FDA approval.

Image 3: Mean reduction of inflammatory and non-inflammatory lesions from baseline until end of study, or week 12, for both DMT310 and Placebo

Image 4. Percent reduction of inflammatory and non-inflammatory lesions from baseline until end of study, or week 12, for both DMT310 and Placebo

Image 5. Investigator Global Assessment response rate at Day 29, or week 4, Day 57, or week 8 and Day 85, or week 12

Additionally, the safety and tolerability profile of DMT310 appeared to be acceptable with a small number of patients experiencing treatment emergent adverse events as seen in Image 6 below. In this Phase 2b trial, no subject receiving treatment with DMT310 experienced a severe local skin reaction at study end nor did any patient undergo a dose modification. Most tolerability issues were mild and resolved shortly after application without any rescue medication as seen in Image 7 below. Overall, DMT310 was generally safe and well tolerated by patients when applied once weekly for 12 weeks.

Image 6. Treatment Emergent Adverse Events

 Image 7: Local Tolerability

DMT310 Phase 2a Clinical Results for Acne

In 2018 we conducted the first clinical trial of DMT310, a randomized, double-blind, 2x2 factorial, placebo-controlled, Phase 2a clinical trial of DMT310 for the treatment of acne. We enrolled 121 patients to evaluate the tolerability, safety, and efficacy of DMT310 mixed with 3% H₂O₂ following 12 weeks of topical administration in male and female patients with moderate-to-severe facial acne. The study employed a 2x2 factorial design to assess the contribution of each component of the investigational product (i.e., Spongilla lacustris topical powder and 3% H₂O₂ USP). This Phase 2a clinical trial employed the same clinical endpoints as our Phase 2b clinical trial of DMT310 for the treatment of acne, as discussed above.

Patients were randomly divided into one of four treatment groups, DMT310 + 3% H₂O₂, DMT310 + Water, Placebo + 3% H₂O₂, or Placebo + Water (control). The patients were required to apply the assigned study drug to their entire face up to once weekly for 12 weeks (84 days), beginning on Day 1 and through Day 78 (as applicable). During study center visits on Days 29 and 57, a determination was made for each patient, based on the Investigator’s Global Assessment (IGA) score, as to whether study drug application would continue once weekly or at a lower biweekly frequency (once every 2 weeks). Specifically, patients with an IGA > 1 at the Day 29 or Day 57 visits continued with once weekly study drug applications, while patients with an IGA 1 at these same visits were instructed to subsequently apply their assigned study drug biweekly (see Image 8 below for a presentation of the study drug application frequency algorithm).

Image 8 Application Frequency Algorithm by Study Visit

This Phase 2a trial showed statistically significant and clinically meaningful effects for its endpoint, absolute reduction in inflammatory lesions when comparing DMT310 + 3% H₂O₂ and placebo + water (control) groups at both week 8 and week 12 or end of study. At week 12, DMT310 + 3% H₂O₂ had a 16-lesion reduction from baseline while placebo + water had an 11 lesion reduction from baseline, with a p-value of less than 0.05. Across all the treatment groups, there was a mean decrease from baseline (i.e., improvement) in the inflammatory and non-inflammatory lesion counts at Days 15, 29, 57, and 85. However, there were no statistically significant differences between the DMT310 + 3% H₂O₂ group versus the placebo + water (control) group for the mean changes from baseline in non-inflammatory lesion counts.

We did not observe a statistically significant difference between the DMT310 + 3% H₂O₂ group and the placebo + water (control) group in the percentages of patients with IGA treatment success (IGA score of 1 or 0 and a 2-grade change) or patients with 1-grade or 2-grade improvements from baseline in IGA at any visit. At Day 85 in the DMT310 + 3% H₂O₂, DMT310 + water, placebo + 3% H₂O₂, and placebo + water groups, 29.6%, 20.0%, 27.6%, and 34.5% of patients had IGA treatment responders, respectively; 66.7%, 66.7%, 65.5%, and 55.2% of subjects had a 1-grade improvement from baseline in the IGA, respectively; and 37.0%, 20.0%, 27.6%, and 34.5% of subjects had a 2-grade improvement from baseline in the IGA, respectively.

Analysis of Placebo: After speaking with the clinical investigators in the trial, it was determined that the higher than normal placebo response in non-inflammatory lesions may have been partially due to the stickiness of the placebo, which required patient to scrub their face, resulting in exfoliation of the skin and removal of sebaceous plugs (whiteheads and blackheads), thereby reducing non-inflammatory lesion counts. We believe this caused a placebo response rate that was much higher than the placebo response rates seen in other topical Phase 2 acne trials. As a result of the inadequate placebo, we developed a new proprietary placebo formulation for our Phase 2b clinical trial.

Once weekly vs. Biweekly Treatment Schedule: Due to this being the first time DMT310 was studied in moderate-to-severe acne patients for 12 weeks, a conservative study design was chosen to ensure patient tolerability and safety while attempting to maintain efficacy. Therefore, we allowed IGA treatment responders (IGA score of 0 or 1) to move to a biweekly or every other week application schedule as discussed above. This resulted in 3 out of 27 patients in the DMT310 + 3% H₂O₂ group and 0 out of 29 patients in the placebo + water group moving from an IGA score of 1 (treatment responder) at week 8 and regressing to an IGA score of 2 (treatment failure) at week 12. Therefore, our Phase 2b clinical trial of DMT310 in moderate-to-severe acne patients incorporated only once weekly applications for 12 weeks with no biweekly option.

No statistical or clinical difference was seen between the placebo + 3% H₂O₂ and the placebo + water groups, which we believe indicates that 3% H₂O₂ by itself does not have a treatment effect.

DMT310 next steps for acne

We are currently preceding with the necessary non-clinical and pharmacokinetic studies and once complete we plan to schedule an End of Phase 2 meeting with the FDA in the first half of 2023 to discuss and finalize the protocol for the Phase 3 clinical trials in moderate-to-severe acne.

Once we are able to hold an End of Phase 2 meeting with the FDA and we receive approval to proceed with Phase 3, we plan to initiate a pivotal Phase 3 program for DMT310 for the treatment of moderate-to-severe acne. We expect this Phase 3 program to include two, multi-center, placebo-controlled trials with identical clinical endpoints to our recently successful Phase 2b clinical trial of DMT310 for the treatment of moderate-to-severe acne. We expect to report top-line data from this program in 2024 and, assuming positive results, file a new drug application, or NDA, with the FDA shortly thereafter. This Phase 3 program is intended to be designed to demonstrate the safety and efficacy of the treatment of DMT310 relative to placebo for the treatment of moderate-to-severe acne. Prior to, or in parallel with our planned Phase 3 program, we intend to continue conducting and complete the additional non-clinical studies necessary to file the NDA. We also intend to conduct a long-term safety study. If DMT310 is approved for the treatment of acne, we believe DMT310 can eventually be an attractive prescription to over-the-counter switch, or Rx-to-OTC, target, which could provide a substantially larger sales opportunity. There can be no assurance that DMT310 will receive FDA approval for the treatment of acne.

DMT310 Phase 1a Clinical Results for Psoriasis

We recently completed a Phase 1a POC trial of DMT310 for the treatment of mild-to-moderate psoriasis. This was an open-label, multi-center, 12-week study in 30 mild-to-moderate psoriasis patients with psoriatic lesions coving between 2-30% of body surface area. The trial aimed at evaluating the tolerability, safety, and efficacy of once weekly treatments of DMT310, which consists of 2 grams of Spongilla powder mixed with 6 mL of 3% H₂O₂. One mild or moderate lesion was selected, and patients were required to apply DMT310 to the entire lesion, once weekly for 12 weeks with the first two weeks of treatment applied in office under the supervision of trained staff, then the remaining 10 weekly treatments were applied at home by the patient.

The endpoints in this study included:

All efficacy analyses were performed using the As-Treated population, which consists of all enrolled patients who received at least one dose of study medication and the per protocol population, which consists of all enrolled patients with no significant protocol violations during the study that would affect the efficacy analyses.

The trial was completed in August 2021 and showed an acceptable safety and tolerability profile that we believe is clinically meaningful and warrants further investigation of DMT310 as a potential treatment for mild-to-moderate psoriasis. DMT310 was able to achieve a PGA score of 0 or 1 for the target lesion in 29.6% of patients at week 8. DMT310 also demonstrated a total PASI score of 0 or 1 for the target lesion in 25.9% of patients at week 8. Notably, DMT310 demonstrated a 19.6% reduction from baseline in pruritus (itch) at week 8 with a peek reduction of 22.5%. We believe these findings from a POC trial are encouraging for the potential use of DMT310 as an easy to apply topical treatment for mild-to-moderate psoriasis with an acceptable safety and tolerability profile.

No reported drug-related severe adverse events were reported in the trial and only two treatment emergent adverse events were reported, both being application site pruritus. Additionally, the drug also appeared to be tolerated by a majority of patients. Of those patients who did report tolerability issues, they also reported that the issues were usually transient and resolved quickly without intervention.

Image 9: Local Tolerability

DMT310 next steps for psoriasis

We are pleased with data already seen in our Phase 1 POC trial, especially seeing a reduction in itch as that is one of the main complaints of patients suffering from psoriasis. We are currently in the process of designing a Phase 2 study of DMT310 for the treatment of psoriasis. The Phase 2 study will be a larger randomized, double-blind, placebo control study of DMT310 for the treatment of psoriasis. Based on the data from the Phase 1b proof of concept study we are considering adding additional arms to examine once versus twice weekly treatment, potentially enhancing the treatment effect seen in our Phase 1b trial. Additionally, due to the unique nature of psoriasis and the general thickness of psoriatic plaques, we may also examine increasing the application pressure and the length of application. We believe that the thicker psoriatic plaques may require a more intensive treatment compared to the application regimen for acne where there is no thickened skin. We believe DMT310 could be a first in class treatment option for psoriasis patients and plan to initiate the Phase 2 trial in 2022 with top-line results expected in 2023. There can be no assurance that DMT310 will receive FDA approval for the treatment of psoriasis.

DMT410 Phase 1b-Primary Axillary Hyperhidrosis

In the first quarter of 2019, we completed a Phase 1b, open-label, POC trial of DMT410 for the treatment of moderate-to-severe primary axillary hyperhidrosis. In this study we treated ten (10) patients with one application of our proprietary sponge powder followed by one topical application of BOTOX, reconstituted per label, to each axilla. Patients were followed for 4 weeks after which time their sweat production was measured and compared with baseline measurements.

The endpoints for this trial included:

After 4 weeks, 80% of patients saw a decrease in gravimetric sweat production greater than 50%, 85% of patients had gravimetric sweat production of less than 50mg, and patients had a 75% decrease in gravimetric sweat product from baseline. Based on this clinical data, we believe that we were able to deliver botulinum toxin into the dermis through topical application for the treatment of primary axillary hyperhidrosis. Treatment with DMT410 also had an acceptable safety and tolerability profile. We plan to partner with a botulinum toxin to run a larger Phase 2 study of DMT410 for axillary hyperhidrosis and possibly for palmar (hand) or plantar (foot) hyperhidrosis where there is currently no approved product. There can be no assurances that DMT410 will receive FDA approval for the treatment of hyperhidrosis.

DMT410 Phase 1b— Upper Facial Lines

In November 2020, we enrolled our first patient in a Phase 1b open-label, POC trial of DMT410 for the treatment of upper facial lines along with multiple other aesthetic skin conditions that are affected by delivery of toxin to the dermis such as pore size, sebum production, brightness, luminosity, fine lines, and Global Aesthetic Improvement. Due to the fact that we do not own rights to a botulinum toxin product, we were required by the FDA to conduct this trial using an approved indication for BOTOX, upper facial lines, an approved dose for this indication (64 units of botulinum toxin) and an approved route of administration, which is typically injections into the muscle rather than the dermis. However, we were interested in studying the clinical effect of DMT410 for the aesthetic skin conditions that require delivery of botulinum toxin to the dermis rather than the muscle, because of our belief that DMT410 only delivers botulinum toxin to the dermis and not the muscle. With these constraints, we initiated the POC trial by enrolling ten (10) female patients, age 18 or older, each receiving one treatment of DMT410, consisting of one topical application of our proprietary sponge powder followed by one topical application for BOTOX, reconstituted per label, to the upper face. Patients were followed for sixteen (16) weeks to determine the achievement of our endpoints along with the duration of effect. We also collected safety and tolerability data. We received top-line data from this study in the November 2021, and believe that we achieved results in multiple aesthetic endpoints sufficient to warrant further investigation of DM410 for the treatment of various aesthetic skin conditions.

The endpoints for this trial were:

The efficacy analysis was conducted on the ITT and Per Protocol (PP), meaning all patients completing the study without a major protocol violation, populations. In addition to the physician measured endpoints listed above, we also implemented 2-dimensional VISIA and 3-dimensional PRIMOS imaging technology from Canfield Scientific to provide objective analysis of many of the aesthetic endpoints.

Based on the assessment of forehead, lateral canthal, and glabellar lines, no patient was considered a responder in this study, while some patients did achieve at least a one-grade change throughout the course of the study. This result was not unexpected as BOTOX is only approved for injections into the muscle and we did not believe that we would see any potential distant spread of toxin outside of the dermis. Seeing no potential distant spread of toxin was encouraging for us as it provides important safety data that while DMT410 can be applied over a larger treatment area than injections, it does not appear to travel beyond the dermis which may cause unwanted facial effects.

We believe the real potential of DMT410 lies in the aesthetic endpoints that can be affected by delivering BOTOX to the dermis rather than the muscles. These clinical endpoints include pore size, global aesthetic improvement, brightness, luminosity, and fine lines. The following table (Image 10) shows the improvements in pore size, or a decrease in overall pore size, with patients achieving at least a 25% improvement in pore size, for assessment of GAI, or the overall improvement in skin quality, the with patients achieving at least a 25% improvement in GAI, for assessment of brightness, or the skin’s combined uniformity of color and texture, with patients having at least a 1-point improvement in brightness, and for assessment of luminosity, or the intensity of light area reflected off the face, with patients having at least a 1-point improvement in brightness.

Image 10: Aesthetic Endpoints

In addition to the physician measured endpoints, we also utilized Canfield Scientific’s 2-dimensional VISIA and 3-dimensional PRIMOS imaging technologies to gather additional objective data on some of the key endpoints. Based on the VISIA system patients saw a 14.1% reduction in pore count and a 14.3% reduction in pore area at week 4. Patients also saw a 16.5% reduction in wrinkle count and a 11.5% reduction in wrinkle area at week 4. Using the PRIMOS image analysis patients saw a percent decrease in mean line, which consist of the deeper facial lines, of 12.1% and a percent change in mean roughness, which consists of the superficial fine lines, of 6.5%. We believe the subjective effects seen by the treating physicians were further validated by the objective measures using Canfield camera systems.

No reported drug-related adverse events were reported in the trial. The drug appeared to be well tolerated by patients, with only mild stinging and erythema reported 15 minutes after treatment and no tolerability issues reported at week 4, 8, 12 or 16.

DMT410 next steps for aesthetics

We are very encouraged by the results from our Phase 1b POC trial of DMT410 for the treatment of multiple aesthetic skin conditions. This was designed to be a signal detection trial of DMT410 for the treatment of a variety of aesthetic skin conditions based on the clinical trial design constraints, including the limitation on the quantity of BOTOX that we were able to apply, the clinical endpoints that needed to be included, and the area of the face that could be treated. Even with these limitations we believe that we achieved results sufficient to warrant the continued development of this program as there remains no approved botulinum toxin, whether via injection or topical, to treat many of the endpoints in which we saw a treatment effect. We believe this is further supported by the fact that many of the endpoints saw an improvement by week eight (8) or twelve (12) and started to return towards baseline at week 16. This is consistent with the knowledge that BOTOX lasts for about three (3) months before the effect begins to fade. We believe that if we can conduct a larger Phase 2 clinical trial that consists of multiple doses of botulinum toxin, we will be able to find the optimal dose for the treatment of a variety of aesthetic skin conditions including pore size, sebum production, fine lines, luminosity, brightness, and overall aesthetic improvement. We know that botulinum toxin has shown efficacy of these endpoints but there has been very little research conducted on the optimal dose or administration procedure, likely due to challenges with intradermal injections and the lack of topical applications that can effectively deliver botulinum toxin to a large enough treatment area as required to treat many of these aesthetic skin conditions. We believe DMT410 can meet this need as shown by our Phase 1b data, so we are actively seeking a partnership with a botulinum toxin company that is interesting in helping us further develop our DMT410 program for multiple aesthetic skin conditions. There can be no assurances that we are able to successfully negotiate a partnership with a botulinum toxin company or that DMT410 will receive FDA approval for the treatment any aesthetic skin conditions.

Manufacturing

We do not currently own or operate any manufacturing facilities and do not plan to own any in the near future. We have been relying on our third-party partners for the manufacture of our products used in pre-clinical studies and clinical trials, and will likely continue to rely on these partners in the near term for the commercial manufacturing of our drug substance and drug product, if our drug product candidates are approved. Manufacturing of the active pharmaceutical ingredient, or API, for our product candidates requires a raw material that is derived from a natural source.

To date, we have obtained naturally sourced Spongilla raw material directly from our supplier based in Russia. In February 2020, we signed an exclusive supply agreement with this supplier of Spongilla raw material. Our supplier has over 18 years of experience collecting and processing Spongilla and has the capacity to collect and process large quantities of Spongilla per year. We believe our supplier is able to harvest sufficient quantities of raw material to fulfill our development and potential commercial needs, if a product candidate is approved using this raw material. However, we are exploring alternative manufacturing sources in order to ensure that we have access to sufficient manufacturing capacity to meet potential demand for any of our product candidates in a cost-efficient manner. See “Business—Material Agreements— Supply Agreement between Dermata Therapeutics LLC and Reka-Farm LLC” for more information regarding our supply of Spongilla.

Development and commercial quantities of any drug product candidates that we may develop will need to be harvested, manufactured in facilities, and processed in compliance with the requirements of the FDA and the regulatory agencies of other jurisdictions in which we are seeking approval. We currently employ internal resources to manage our manufacturing contractors. The relevant manufacturers of our drug product candidates have advised us that they are in compliance with both current Good Laboratory Practices, or cGLP, and cGMP.

We have relied upon our complete supply chain while supporting both our Phase 1 and Phase 2 clinical supply requirements and we are confident that our manufacturers have the ability to scale our processes to support our Phase 3 clinical studies and future commercial commitments. Our suppliers and manufactures were specifically selected based on the capabilities of their organization, their compliance to regulations, their personnel and the type and capabilities of their equipment. Testing methods for each stage of the manufacturing process form acquisition of raw materials through production of finished drug product have been developed and satisfactorily qualified per the FDA’s phase appropriate regulations relating to clinical materials for human use. Analytical methods and operational procedures related to each stage of our production operations including product release will continue to evolve and be validated as part of our overall development plan for Phase 3 clinical supplies and commercial production.

Commercialization

Given our stage of development, we do not currently have any internal sales, marketing, or distribution infrastructure or capabilities. If approved, we intend to commercialize DMT310, or any other product candidates that we may successfully develop, in the United States by building a specialized sales organization focused on dermatologists. We believe a scientifically oriented, customer-focused team of approximately 50-60 sales representatives would allow us to reach our targeted dermatologists in the U.S. with the highest potential for prescribing DMT310. In the future, we may develop and commercialize DMT310 for additional geographic regions, independently or with a strategic partner. If DMT310 is approved, and we are able to successfully commercialize it, we believe DMT310 can eventually become an attractive Rx-to-OTC switch target, which could provide a substantially larger addressable market and an expanded sales opportunity.

Competition

The medical and aesthetic pharmaceutical industries in which we plan to operate are competitive and subject to changes in practice. While we believe that our unique natural technology, knowledge, experience and resources provide us with competitive advantages, we may face competition from many different sources with respect to our current programs or any other product candidates that we may seek to develop or commercialize in the future. Possible competitors may include pharmaceutical companies, academic and medical institutions, governmental agencies and public and private research institutions. These prospective competitors have the ability to effectively commercialize, market and promote approved products, including communicating the effectiveness, safety and value of products to actual and prospective customers.

Many of our prospective competitors have substantially greater manufacturing, financial, research and development, personnel, and marketing resources than we do. Our prospective competitors may also have more experience and expertise in obtaining marketing approvals from the FDA and foreign regulatory authorities. In addition to product development, testing, approval and promotion, other competitive factors in the pharmaceutical industry include industry consolidation, product quality and price, product technology, reputation, customer service and access to technical information. As a result, our prospective competitors may be able to develop competing or superior products, and compete more aggressively and sustain their competitive advantage over a longer period of time than us. Our products may be rendered obsolete or may lack economic viability in the face of competition.

The key competitive factors affecting the success of DMT310, if approved, will likely be its efficacy, safety, convenience of administration and delivery, price, and the availability of reimbursement from government and other third-party payors. With respect to DMT310 for the treatment of moderate-to-severe acne, if approved, we will primarily be competing with therapies such as other topical products, oral products, in-office procedures, such as laser surgery, off-label drugs, over the counter medication and homeopathic remedies. With regards to DMT310 for the treatment of mild-to-moderate psoriasis, if approved, we will face competition from topical therapies, oral therapies, systemic therapies, photo therapies and homeopathic treatments. However, based on our clinical trials, we believe that DMT310 has multiple competitive advantages over current treatment alternatives with significantly less adverse side effects. Our main competition in these indications will be with products from Vyne Therapeutics, Inc, Sol-Gel Technologies Ltd., Arcutis Biotherapeutics, Inc., Almirall S.A., Galderma S.A., Pfizer Inc. See “Business – Clinical Progress of our Lead Product Candidates” for the results of our completed and ongoing clinical trials. While we are unaware of any potential similar competitive topical products to DMT310 for the treatment of acne, psoriasis, and rosacea, it is possible that such potentially similar competitive products are currently being developed.

We are also in early stages of clinical development for DMT410 for treating various medical and aesthetic skin conditions and diseases, and if we obtain marketing approval in the future, we will compete with traditional therapies, such as topical products, oral products, in-office procedures, such as botulinum toxin injections, off-label drugs, over the counter medication and homeopathic remedies, as well as additional new entrants to the applicable markets.

We also expect to face competition in our efforts to identify appropriate collaborators or partners to help commercialize our product candidate portfolio in our target commercial markets.

Intellectual Property

Overview

Our commercial success depends in part on our ability to obtain and maintain proprietary protection for DMT310, DMT410 and any of our future product candidates, medical devices, methodologies, assays, drug development technologies, harvesting procedures, know-how; to operate without infringing on or otherwise violating the proprietary rights of others; and to prevent others from infringing or otherwise violating our proprietary rights. Our strategy is to protect our proprietary position by, among other things, filing U.S. and foreign patent applications related to our product candidate and other proprietary technologies, inventions and improvements that are important to the development and implementation of our business. We also rely on trade secrets, trademarks, know-how, continuing technological innovations, exclusivity agreements, nondisclosure and confidentiality agreements, license agreements, assignment of inventions and potential in-licensing opportunities to develop and maintain our proprietary position.

Patent Portfolio

Our patent estate consists of in-licensed and solely owned patent applications. Typically, we initially file U.S. provisional patent applications and then file applications directly or under the Patent Cooperation Treaty, or PCT, which is an international patent law treaty that provides a unified procedure for filing a single initial patent application to seek patent protection from an invention simultaneously in any one of the designated member jurisdictions and states, including in the U.S. Although a PCT application does not issue as a patent, it allows the applicant to seek protection in any of the member states through national-phase applications filed at a later date. We currently have multiple patent or patent applications in our patent portfolio and continue to pursue and seek additional patent coverage of all our product candidates.

DMT310

Our DMT310 portfolio includes two families, one in-licensed and one owned by Dermata. The in-licensed family includes patents and patent applications in-licensed from Villani, Inc. related to therapeutic compositions and methods for treating skin conditions. The in-licensed portfolio consists of one pending non-provisional U.S. patent application, two granted U.S. patents, and granted foreign patents in Australia, Brazil, Canada, France, Germany, Ireland, Italy, Mexico, Russia, Singapore, South Korea, Spain, Switzerland, and the United Kingdom. Additionally, the issued foreign patent in Japan, has lapsed and is no longer in force or valid. These patents are expected to expire between 2022 and 2023, absent any patent term adjustments or extensions. Based on the anticipated timing of any potential FDA approval of DMT310 for acne, the patents that expire in 2022 and 2023 are not material to our business, as we do not expect these patents to provide any protection for our product candidates. We expect our intellectual property portfolio to be protected by any potential NCE exclusivity for DMT310 and our other product candidates, the maintaining of our exclusive supply agreement for our raw material requirements, and our continued efforts to protect our proprietary information. We also have an additional Dermata owned family related to DMT310, with applications pending in the U.S., Australia, and Canada. This family refers to specific attributes of the DMT310 API and drug product as well as treatment related attributes for the treatment of acne based on the data received prior to its filing. Patents in this patent family, if granted, are expected to expire in 2039, absent any patent term adjustments or extensions.

DMT410

Our DMT410 portfolio includes two families owned by Dermata. The first family consists of one pending non-provisional U.S. patent application and six pending foreign patent applications in Australia, Canada, China, the European Patent Office, Japan, and South Korea. These patent applications relate to compositions for the treatment of skin diseases using our proprietary sponge powder in combination with multiple types of botulinum toxin for both medical and aesthetic skin conditions and diseases. Patents in this patent family, if granted, are expected to expire in 2039, absent any patent term adjustments or extensions. The second family is related to certain of our clinical methods related to sponge powder and botulinum toxin. This second family consists of a US non-provisional application and a PCT application. Patents in this patent family, if granted are expected to expire in 2041, absent any patent term adjustments or extensions.

DMT400

Our DMT400 portfolio includes two families owned by Dermata. The first family consists of pending applications in the U.S., Canada, and Japan covering our sponge powder in combination with many approved and development stage monoclonal antibodies for the treatment of skin diseases. Patents in this patent family, if granted, are expected to expire in 2039, absent any patent term adjustments or extensions. The second family consists of a pending applications in the U.S., Australia, Japan, and South Korea, covering compositions for the treatment of conditions by dermal fillers in combination with our proprietary sponge powder. Patents in this patent family, if granted, are expected to expire in 2040, absent any patent term adjustments or extensions.

Although we believe our patent portfolio offers significant protection for DMT310, DMT410 and DMT400 and additional combination regimens, the protection offered by our patents may be, to some extent, more limited than the protection provided by patents which claim chemical structures which were previously unknown. Accordingly, other parties may compete with us, for example, by independently developing or obtaining competing topical formulations that design around our patent claims, but which may contain the same or similar active ingredients, or by seeking to invalidate our patents.

The term of individual patents depends upon the laws of the countries in which they are obtained. In most countries in which we file, the patent term is 20 years from the earliest priority date of filing of a non-provisional patent application. However, the term of United States patents may be extended for delays incurred due to compliance with the FDA, requirements or by delays encountered during prosecution that are caused by the United States Patent and Trademark Office, or the USPTO. For example, the Hatch-Waxman Act permits a patent term extension for FDA-approved drugs of up to five years beyond the expiration of the patent. The length of the patent term extension is related to the length of time the drug is under regulatory review. Patent extension cannot extend the remaining term of a patent beyond a total of 14 years from the date of product approval, and only one patent applicable to an approved drug may be extended. Similar provisions are available in Europe and other jurisdictions to extend the term of a patent that covers an approved drug. In the future, if and when our product candidates receive FDA approval, we expect to apply for patent term extensions on patents covering those product candidates. We intend to seek patent term extensions in any jurisdiction where these are available and where we also have a patent that may be eligible; however there is no guarantee that the applicable authorities, including the United State Patent and Trademark Office and United States FDA, will agree with our assessment of whether such extensions should be granted, and even if granted, the length of such extensions.

Other Intellectual Property

In addition to patent protection, we also rely heavily on trade secrets, including unpatented know-how, technology innovation, technical specifications and assays and other proprietary information in attempting to develop and maintain our competitive advantage. We believe our ability to protect our unpatented know-how and trade secrets are as important if not more important than our patent portfolio due the complex nature and lack of expiration associated with such information.

We seek trademark protection in the United States and in certain other jurisdictions where available and when we deem appropriate. We currently have registrations for Dermata in the United States and multiple other jurisdictions. We intend to file applications for trademark registrations in connection with our therapeutic candidates in various jurisdictions, including the United States.

Material Agreements

License Agreement between Dermata Therapeutics, LLC and Villani, Inc.

On March 31, 2017, we entered into a License Agreement (or, the License Agreement) with Villani, Inc. (or, Villani), whereby Villani has granted us an exclusive, sub-licensable, royalty-bearing license (or, the License) under the Licensed Patents (as defined in the License Agreement), to formulate, develop, seek regulatory approval for, make or sell products that contain Spongilla lacustris (alone or in combination with other active or inactive ingredients) for the treatment of diseases, disorders and conditions of the skin, including but not limited to acne, rosacea, psoriasis, atopic dermatitis, seborrheic dermatitis, actinic keratosis and eczema that were developed using certain licensed know-how (or, the Licensed Products). We are responsible for the development (including manufacturing, packaging, non-clinical studies, clinical trials and obtaining regulatory approval) and commercialization (including marketing, promotion, distribution, etc.) for all Licensed Products.

In partial consideration of the License, we forgave our outstanding loan to Villani in the amount of $400,000, and agreed to make future milestone payments to Villani. The milestone payments due to Villani under the License Agreement have been amended to the amounts described below in connection with our entry into the Second License Amendment (as defined below).

The License Agreement may be terminated (i) by either party for material breach with 90 days written notice, or 30 days’ notice if for material payment breach, if such material breach is not cured within such notice period, (ii) immediately upon written notice to either party if either party initiates a voluntary bankruptcy proceeding, dissolves or winds-up its business, (iii) immediately upon written notice to either party if either party becomes subject to involuntary bankruptcy proceedings, if such proceedings are not dismissed or stayed within 90 days.

The License Agreement includes customary terms relating to, among others, indemnification, intellectual property protection, confidentiality, remedies and warranties.

On June 4, 2019, we entered into a License Amendment and Settlement Agreement (or the First License Amendment) with Villani. Pursuant to the First License Amendment, we made milestone payments to Villani in an aggregate amount of $750,000, and in exchange for certain know-how, we issued to Villani 5,221,156 units of our Series 1c Preferred Units (which units were converted into shares of our Series 1c Preferred Stock in connection with our conversion into a Delaware corporation, which was equal to 5% of our total capitalization (on a fully-diluted basis) at the time of issuance). At the time of issuance, these units were valued at $730,962. We subsequently cancelled the shares of Series 1c Preferred Stock issued to Villani pursuant to the Second License Amendment, as described below. Pursuant to the First License Amendment, we also agreed to make certain milestone payments to Villani, which rates were subsequently amended pursuant to the Second License Amendment, as discussed below. To date, the $750,000 milestone payment made in connection with the First License Amendment is the total amount paid to Villani in connection with the License.

On July 30, 2021, we entered into a Second Amendment to the License and Settlement Agreement (or, the Second License Amendment), whereby, for the settlement of certain disputes arising under the First License Amendment, we agreed to exchange the shares of Series 1c Preferred Stock owned by Villani for an increase of milestone payments and royalty rates due to Villani under the License Agreement. The resulting royalty rates payable pursuant to the Second License Amendment are equal to single-digit percentages of net sales of Licensed Products and HMW Combination Products (as defined in the License Agreement), subject to certain adjustments as set forth in the Second License Amendment. Royalties are payable on a country-by-country and Licensed Product-by-Licensed Product basis, for the period of time from the effective date of the License Agreement until the later of (i) the expiration of the last to expire valid claim in such country (which is set to expire in 2023), (ii) the expiration of regulatory exclusivity for such Licensed Product in such country, and (iii) 15 years from the date of the first commercial sale of the Licensed Product in such country. Pursuant to the Second License Amendment, if we sublicense the License, we are obligated to pay to Villani a sublicense fee of between 10% and 30% of Sublicense Revenues (as defined in the License Agreement). Such future milestone payments due to Villani (all payable to Villani in cash or in equity, at the option of Villani) are in aggregate amounts of up to $3.5 million in development milestones and $37.0 million in sales milestones. We paid to Villani $1.0 million upon the closing of our initial public offering.

Supply Agreement between Dermata Therapeutics LLC and Reka-Farm LLC

On February 27, 2020, we entered into an exclusive Supply Agreement (or, the Supply Agreement) with Reka-Farm, LLC (or, Reka-Farm), whereby Reka-Farm will supply us with the Spongilla raw materials necessary for use in the development of our product candidates. The Supply Agreement has an indefinite term unless and until terminated. For the term of the Supply Agreement, Reka-Farm is prohibited from supplying Spongilla for development and sale of any other product outside of the Russian Federation, other than Cosmetic Products (as defined in the Supply Agreement).

Pursuant to the Supply Agreement, we shall provide Reka-Farm with two-year rolling forecasts of our Spongilla raw material requirements, and such forecasts shall be provided to Reka-Farm on a semi-annual basis, beginning on January 1, 2021 (each, a Forecast). Pursuant to the Supply Agreement, Reka-Farm has guaranteed its ability to supply us with the required amounts of Spongilla as specified in each Forecast for the first 12 months of each Forecast. All Forecasts are non-binding on us. If Reka-Farm is unable to supply us with Spongilla raw material in accordance with a Forecast, all available quantities of Spongilla then available to Reka-Farm shall be made available to us on a first priority basis until all amounts of Spongilla set forth in the Forecast are supplied.

Pursuant to the Supply Agreement, we pay a pre-negotiated price per kilogram for Spongilla supplied by Reka-Farm, and we are required to pay to Reka-Farm a royalty payments of less than one percent of the Net Sales (as defined in the Supply Agreement) of any products we develop containing Spongilla raw material supplied by Reka-Farm.

The Supply Agreement may be terminated (i) by either party for material breach with 90 days written notice, if such material breach is not cured within such notice period and (ii) by us for any reason or no reason upon 90 days written notice to Reka-Farm.

The Supply Agreement includes customary terms relating to, among others, indemnification, intellectual property protection, confidentiality, remedies, warranties, as well as certain quality requirements.

Employees

As of the date of this report, we have eight full time employees, with three employees working in the general and administrative department, two engaged in non-clinical and clinical development, two working in the chemistry, manufacturing and controls department, and one employee working in the regulatory affairs and quality control department.

ITEM 1A. RISK FACTORS

Investing in our securities involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this report, including the consolidated financial statements, the notes thereto and the section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this report before deciding whether to invest in our securities. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of or that we deem immaterial may also become important factors that adversely affect our business. If any of the following risks actually occur, our business, financial condition, results of operations and future prospects could be materially and adversely affected. In that event, the market price of our common stock and/or Warrants could decline, and you could lose part or all of your investment.

Summary of Risks Associated with Our Business

Our business and an investment in our company is subject to numerous risks and uncertainties, including those highlighted in the section titled “Risk Factors” immediately following this summary. Some of these risks include:

Risks Related to Our Financial Position and Need for Capital

We are a clinical stage pharmaceutical company with a limited operating history.

We are a clinical-stage biopharmaceutical company with a limited operating history upon which you can evaluate our business and prospects. We must complete clinical studies and receive regulatory approval before commercial sales of a product can commence. The likelihood of success of our business plan must be considered in light of the problems, substantial expenses, difficulties, complications and delays frequently encountered in connection with developing and expanding early-stage businesses and the regulatory and competitive environment in which we operate. Pharmaceutical product development is a highly speculative undertaking, involves a substantial degree of risk and is a capital-intensive business.

Accordingly, you should consider our prospects in light of the costs, uncertainties, delays and difficulties frequently encountered by companies in the early stages of development, especially early stage clinical pharmaceutical companies such as ours. Potential investors should carefully consider the risks and uncertainties that a company with a limited operating history will face. In particular, potential investors should consider that we cannot assure you that we will be able to, among other things:

If we cannot successfully execute any one of the foregoing, our business may fail and your investment will be adversely affected.

We have incurred losses since inception and anticipate that we will continue to incur losses for the foreseeable future. We are not currently profitable, and we may never achieve or sustain profitability.

We have never generated revenue from operations, are unlikely to generate revenues for several years, and are currently operating at a loss and expect our operating costs will increase significantly as we incur costs related to preclinical development, the clinical trials for our drug candidates and to operating as a public company. We expect to incur substantial expenses without corresponding revenues unless and until we are able to obtain regulatory approval and successfully commercialize any of our drug candidates. We may never be able to obtain regulatory approval for the marketing of our drug candidates in any indication in the United States or internationally. Even if we are able to commercialize our drug candidates, there can be no assurance that we will generate significant revenues or ever achieve profitability. We have incurred losses in each year since we commenced operations in December 2014. We incurred net losses of approximately $7.9 million and approximately $3.2 million for the years ended December 31, 2021 and 2020, respectively. As of December 31, 2021, we had an accumulated deficit of approximately $36 million. The size of our future net losses will depend, in part, on our future expenses and our ability to generate revenue, if any. Revenue from our current and potential future collaborations is uncertain because milestones or other contingent payments under our agreements may not be achieved or received.

As of December 31, 2021, we had capital resources consisting of cash of $10.8 million. We will continue to expend substantial cash resources for the foreseeable future for the clinical development of our product candidates and development of any other indications and product candidates we may choose to pursue. These expenditures will include costs associated with research and development, conducting preclinical studies and clinical trials, manufacturing and supply, as well as marketing and selling any products approved for sale. In particular, our Phase 3 clinical studies for our product candidates will require substantial funds to complete. Because the conduct and results of any clinical trial are highly uncertain, we cannot reasonably estimate the actual amounts necessary to successfully complete the development and commercialization of our current and any future product candidates.

We are uncertain when or if we will be able to achieve or sustain profitability. If we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods. Failure to become and remain profitable would impair our ability to sustain operations and adversely affect the price of our common stock or Warrants and our ability to raise capital.

We will require additional capital to fund our operations, and if we fail to obtain necessary financing, we may not be able to complete the development and commercialization of our drugs.

We believe that our existing cash, together with interest thereon, will be sufficient to fund our operations into the fourth quarter of 2022. We have based these estimates, however, on assumptions that may prove to be wrong, and we could spend our available capital resources much faster than we currently expect or require more capital to fund our operations than we currently expect. Our currently anticipated expenditures for the development of our product candidates, DMT310 and DMT410, exceed our existing cash. We will need to raise additional capital to fund our operations and continue to support our planned development and commercialization activities.

The amount and timing of our future funding requirements will depend on many factors, including:

We cannot be certain that additional funding will be available on acceptable terms, or at all. In addition, future debt financing into which we enter may impose upon us covenants that restrict our operations, including limitations on our ability to incur liens or additional debt, pay dividends, redeem our stock, make certain investments and engage in certain merger, consolidation or asset sale transactions.

If we are unable to raise additional capital when required or on acceptable terms, we may be required to significantly delay, scale back or discontinue the development or commercialization of one or more of our product candidates, restrict our operations or obtain funds by entering into agreements on unattractive terms, which would likely have a material adverse effect on our business, stock price and our relationships with third parties with whom we have business relationships, at least until additional funding is obtained. If we do not have sufficient funds to continue operations, we could be required to seek bankruptcy protection or other alternatives that would likely result in our stockholders losing some or all of their investment in us. In addition, our ability to achieve profitability or to respond to competitive pressures would be significantly limited.

Raising additional capital may cause dilution to our stockholders, restrict our operations or require us to relinquish rights to our technologies or product candidates.

Until such time, if ever, as we can generate substantial revenue, we may finance our cash needs through a combination of equity offerings, debt financings, marketing and distribution arrangements and other collaborations, strategic alliances and licensing arrangements or other sources. We do not currently have any committed external source of funds. In addition, we may seek additional capital due to favorable market conditions or strategic considerations, even if we believe that we have sufficient funds for our current or future operating plans.

To the extent that we raise additional capital through the sale of equity or convertible debt securities, your ownership interest will be diluted, and the terms of these securities may include liquidation or other preferences that adversely affect your rights as a common stockholder. Debt financing and preferred equity financing, if available, may involve agreements that include covenants limiting or restricting our ability to take specific actions, such as incurring additional debt, making capital expenditures or declaring dividends. If we raise additional funds through collaborations, strategic alliances or marketing, distribution or licensing arrangements with third parties, we may be required to relinquish valuable rights to our technologies, intellectual property, future revenue streams or product candidates or grant licenses on terms that may not be favorable to us. If we are unable to raise additional funds through equity or debt financings when needed, we may be required to delay, limit, reduce or terminate product candidate development or future commercialization efforts.

The reports of our independent registered public accounting firm for the fiscal years ended December 31, 2021 and 2020 contain an explanatory paragraph regarding substantial doubt about our ability to continue as a going concern.

Due to the uncertainty of our ability to meet our current operating and capital expenses, in its report on our audited annual financial statements as of and for the years ended December 31, 2021 and December 31, 2020, our independent auditors included an explanatory paragraph regarding concerns about our ability to continue as a going concern. Substantial doubt about our ability to continue as a going concern may materially and adversely affect the price per share of our common stock and Warrants and we may have a more difficult time obtaining financing. Further, the perception that we may be unable to continue as a going concern may impede our ability to raise additional funds or operate our business due to concerns regarding our ability to discharge our contractual obligations.

Changes in tax laws may materially adversely affect our business financial condition, results of operations and cash flows.

We are subject to tax laws, regulations and policies of the jurisdictions in which we do business, which may include U.S. federal, state, and local governments and taxing authorities in foreign jurisdictions. Changes in tax laws, as well as other factors, could cause us to experience fluctuations in our tax obligations and otherwise adversely affect our tax positions and/or our tax liabilities. The income tax rules in the jurisdictions in which we operate are constantly under review by taxing authorities and other governmental bodies. Changes to tax laws (which changes may have retroactive application) could adversely affect us or our stockholders. We are unable to predict what tax proposals may be proposed or enacted in the future or what effect such changes would have on our business, but such changes, to the extent they are brought into tax legislation, regulations, policies or practices, could affect our financial position and overall effective tax rates in the future in jurisdictions where we have operations, and increase the complexity, burden and cost of tax compliance.

Risks Related to Development, Regulatory Approval and Commercialization

A pandemic, epidemic, or outbreak of an infectious disease, such as COVID-19 could cause a disruption to the development of our product candidates.

Public health crises such as pandemics or similar outbreaks could adversely impact our business. In December 2019, a novel strain of a virus named SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2), or coronavirus, which causes COVID-19, surfaced in Wuhan, China and has since spread worldwide. The coronavirus pandemic is evolving, and to date has led to the implementation of various responses, including government-imposed quarantines, travel restrictions and other public health safety measures. The extent to which the coronavirus impacts our operations or those of our third-party partners, including our preclinical studies or clinical trial operations, will also depend on future developments, which are highly uncertain and cannot be predicted with confidence, including the duration of the outbreak, new information that will emerge concerning the severity of the coronavirus and the actions to contain the coronavirus or treat its impact, among others. The continued spread of COVID-19 globally could adversely impact our preclinical or clinical trial operations in the U.S. and abroad, including our ability to recruit and retain patients and principal investigators and site staff who, as healthcare providers, may have heightened exposure to COVID-19. For example, similar to other biopharmaceutical companies, we may experience delays in enrolling our clinical trials currently planned for 2022 and 2023. COVID-19 may also affect employees of third-party CROs located in affected geographies that we rely upon to carry out our clinical trials. Any negative impact COVID-19 has to patient enrollment or treatment or the execution of our product candidates could cause costly delays to clinical trial activities, which could adversely affect our ability to obtain regulatory approval for and to commercialize our product candidates, increase our operating expenses, and have a material adverse effect on our financial results.

Additionally, timely enrollment in planned clinical trials is dependent upon clinical trial sites which could be adversely affected by global health matters, such as pandemics. We plan to conduct clinical trials for our product candidates in geographies which are currently being affected by the coronavirus. Some factors from the coronavirus outbreak that will delay or otherwise adversely affect enrollment in the clinical trials of our product candidates, as well as our business generally, include:

We have taken temporary precautionary measures intended to help minimize the risk of the virus to our employees, including having all of our employees to work remotely, suspending all non-essential travel worldwide for our employees and discouraging employee attendance at industry events and in-person work-related meetings, which could negatively affect our business. We cannot presently predict the scope and severity of the planned and potential shutdowns or disruptions of businesses and government agencies, such as the Securities and Exchange Commission, or the SEC, or FDA.

Disruptions in the global economy and supply chains may have a material adverse effect on our business, financial condition and results of operations.

The disruptions to the global economy in 2020 and into 2021 have impeded global supply chains, resulting in longer lead times and also increased critical component costs and freight expenses. We have taken and may have to take steps to minimize the impact of these disruptions in lead times and increased costs by working closely with our suppliers and other third parties on whom we rely for the conduct of our business. Despite the actions we have undertaken or may have to undertake to minimize the impacts from disruptions to the global economy, there can be no assurances that unforeseen future events in the global supply chain will not have a material adverse effect on our business, financial condition and results of operations. To date, we have experienced difficulties in obtaining the necessary supply of minipigs required to conduct a required 90-day dermal minipig study, and as a result, we may be forced to delay the start of such study.

Furthermore, inflation can adversely affect us by increasing the costs of clinical trials, the research and development of our product candidates, as well as administration and other costs of doing business. We may experience increases in the prices of labor and other costs of doing business. In an inflationary environment, cost increases may outpace our expectations, causing us to use our cash and other liquid assets faster than forecasted. If this happens, we may need to raise additional capital to fund our operations, which may not be available in sufficient amounts or on reasonable terms, if at all, sooner than expected.

Adverse global conditions, including economic uncertainty, may negatively impact our financial results.

Global conditions, dislocations in the financial markets, any negative financial impacts affecting United States as a result of tax reform or changes to existing trade agreements or tax conventions, may adversely impact our business.

In addition, the global macroeconomic environment could be negatively affected by, among other things, COVID-19 or other pandemics or epidemics, instability in global economic markets, increased U.S. trade tariffs and trade disputes with other countries, instability in the global credit markets, supply chain weaknesses, instability in the geopolitical environment as a result of the withdrawal of the United Kingdom from the European Union, the Russian invasion of Ukraine and other political tensions, and foreign governmental debt concerns. Such challenges have caused, and may continue to cause, uncertainty and instability in local economies and in global financial markets.

Our business is dependent on the successful development, regulatory approval and commercialization of our product candidates, in particular DMT310.

Our portfolio of product candidates includes one mid-stage product candidate, DMT310, a once weekly topical, naturally-derived product candidate for the treatment of acne. rosacea, and psoriasis, and an early-stage candidate, DMT410, a combination treatment regimen to aid in the topical delivery of botulinum toxin for the treatment of hyperhidrosis and aesthetic skin conditions. The success of our business, including our ability to finance our company and generate any revenue in the future, will primarily depend on the successful development, regulatory approval and commercialization or partnering of our product candidates. In the future, we may also become dependent on just one of our product candidates or any future product candidates that we may in-license, acquire or develop. The clinical and commercial success of our product candidates will depend on a number of factors, including the following:

If we are unable to achieve one or more of the above factors, many of which are beyond our control, in a timely manner or at all, we could experience significant delays and increased costs or an inability to obtain regulatory approvals or commercialize our product candidates. Even if regulatory approvals are obtained, we may never be able to successfully commercialize any of our product candidates. Accordingly, we cannot assure you that we will be able to generate sufficient revenue through the sale of our product candidates or any future product candidates to continue operations.

According to the FDA Guidelines, we are required to complete a 90-day dermal minipig study and a standard dermal pharmacokinetic study prior to holding an End of Phase 2 meeting with the agency. The minipig and pharmacokinetic studies can be complicated, time consuming, and expensive and we may be unsuccessful in completing the required studies, which could prevent or delay the Phase 3 program and regulatory approval and commercialization.

Part of required drug development for topical products is completion of a 90-day dermal minipig study and a standard dermal pharmacokinetic development plan prior to holding an End of Phase 2 meeting with the FDA. This plan can be difficult to design and conduct and its outcome is uncertain. As part of this dermal pharmacokinetic development plan, we need to develop and validate an analytical method to detect an analyte in rat, minipig and human plasma, which will be difficult, time consuming, and expensive. While we have identified an analyte that is present in DMT310, we have yet to develop a method with sufficient sensitivity to detect the analyte at the required levels. If we are delayed or unable to develop such method, we may be required to identify a new analyte of DMT310 to use in the pharmacokinetic development plan. Even if we are able to successfully develop a bioanalytical method to detect the identified analyte, we still must validate the bioanalytical method under good laboratory practice, or GLP, conditions. There is no guarantee that we will be able to do so successfully. If we are unable to validate such a bioanalytical method then we may be required to develop a new bioanalytical method or identify a new analyte for the pharmacokinetic development plan, which could prevent or delay regulatory approval and commercialization.

Prior to holding an End of Phase 2 meeting with the FDA and after validating the bioanalytical method under GLP conditions, we must conduct a 90-day dermal minipig study and a maximum use pharmacokinetic study in humans, the outcomes of which are unknown and difficult to predict. Due to delays and constraints in the global supply chain for the minipigs to be used in the 90-day dermal minipig study, we may be forced to delay the start of such study. Additionally, if the outcomes of these studies are not satisfactory to the FDA, we may be required to conduct the entire pharmacokinetic development plan again, which could result in additional development costs and a delay in our development timeline, in which case our business could be materially harmed.

Clinical drug development for our product candidates is very expensive, time-consuming and uncertain. Our clinical trials may fail to adequately demonstrate the safety and efficacy of our product candidates, which could prevent or delay regulatory approval and commercialization.

Clinical drug development for our product candidates is very expensive, time-consuming, difficult to design and implement and its outcome is inherently uncertain. Before obtaining regulatory approval for the commercial sale of a product candidate, we must demonstrate through clinical trials that a product candidate is both safe and effective for use in the target indication, which is impossible to predict. Most product candidates that commence clinical trials are never approved by regulatory authorities for commercialization. Our product candidates are in various stages of development and a failure of one more clinical trials can occur at any stage of testing or at any time during the trial process. We expect that clinical trials for these product candidates will continue for several years, but may take significantly longer than expected to complete.

We have not completed all clinical trials for the approval of any of our product candidates. We have yet to hold an End of Phase 2 meeting with the FDA and do not know what feedback they will provide us. In previous communications with the FDA they had asked us to show that hydrogen peroxide was not an active ingredient in our DMT310 product. If we do not supply sufficient evidence and data to convince the FDA that hydrogen peroxide is not an active ingredient and merely a fluidizing agent (hydrogen peroxide), then we may have to alter our clinical plans or reformulate our product based on FDA feedback. If we chose to reformulate our lead product, DMT310, then we may decide to redo our Phase 2 studies, which would be time consuming and expensive and there is no certainty of success.

We may experience delays in ongoing and future clinical trials for our product candidates and do not know if future clinical trials, if any, will begin on time, need to be redesigned, enroll adequate number of patients on time or be completed on schedule, if at all. In addition, we, any partner with which we currently or may in the future collaborate, the FDA, an IRB or other regulatory authorities, including state and local agencies and counterpart agencies in foreign countries, may suspend, delay, require modifications to or terminate our clinical trials at any time, for various reasons, including:

In the case of our topical product candidates, we are seeking to deliver sufficient concentrations of the active pharmaceutical ingredient, or API, through the skin barrier to the targeted dermal tissue to achieve the intended therapeutic effect. As a result, safety and efficacy can be difficult to establish. The topical route of administration may involve new formulations and dosage forms, which can be difficult to develop and manufacture and may raise novel regulatory issues and result in development or review delays. For example, the API for DMT310 is a milled sponge powder, and we are not aware of previous FDA approvals of sponges as a prescription drug.

We or any partner with which we may collaborate may suffer significant setbacks in our clinical trials similar to the experience of a number of other companies in the pharmaceutical and biotechnology industries, even after receiving promising results in earlier trials. In the event that we or our potential partners abandon or are delayed in the clinical development efforts related to our product candidates, we may not be able to execute on our business plan effectively and our business, financial condition, operating results and prospects would be harmed.

Changes in methods of product candidate manufacturing or formulation may result in additional costs or delay.

As product candidates proceed through preclinical studies to late-stage clinical trials towards potential approval and commercialization, it is common that various aspects of the development program, such as manufacturing methods and formulation, are altered along the way in an effort to optimize processes and results. Such changes carry the risk that they will not achieve these intended objectives. Any of these changes could cause our product candidates to perform differently and affect the results of planned clinical trials or other future clinical trials conducted with the altered materials. Such changes may also require additional testing, FDA notification or FDA approval. This could delay completion of clinical trials, require the conduct of bridging clinical trials or the repetition of one or more clinical trials.

We may be unable to obtain regulatory approval for DMT310, or our early-stage product candidates under applicable regulatory requirements. The FDA and foreign regulatory bodies have substantial discretion in the approval process, including the ability to delay, limit or deny approval of product candidates. The delay, limitation or denial of any regulatory approval would adversely impact commercialization, our potential to generate revenue, our business and our operating results.

We currently have no products approved for sale, and we may never obtain regulatory approval to commercialize any of our current or future product candidates. The research, testing, manufacturing, safety surveillance, efficacy, quality control, recordkeeping, labeling, packaging, storage, approval, sale, marketing, distribution, import, export, and reporting of safety and other post-market information related to our drug products are subject to extensive regulation by the FDA and other regulatory authorities in the United States and in foreign countries, and such regulations differ from country to country. We are not permitted to market any of our current product candidates in the United States until we receive approval of a new drug application, or NDA, or other applicable regulatory filing from the FDA. We are also not permitted to market any of our current product candidates in any foreign countries until we or our partners receive the requisite approval from the applicable regulatory authorities of such countries.

To gain approval to market a new drug such as DMT310 or DMT410, the FDA and/or foreign regulatory authorities must receive, among other things, preclinical and clinical data that adequately demonstrate the safety, purity, potency, efficacy and compliant manufacturing of the drug product for the intended indication applied for in an NDA, or other applicable regulatory filing. The development and approval of a product derived from a natural source and new drug products involves a long, expensive and uncertain process, and delay or failure can occur at any stage. A number of companies in the pharmaceutical and biopharmaceutical industry have suffered significant setbacks in nonclinical development, clinical trials, including in Phase 3 clinical development, even after promising results in earlier preclinical studies or clinical trials. These setbacks have been caused by, among other things, findings made while clinical trials were underway and safety or efficacy observations made in clinical trials, including previously unreported adverse events. Success in clinical trials does not ensure that later clinical trials will be successful, or that nonclinical studies will be successful. The results of clinical trials by other parties may not be indicative of the results in trials we or our partners may conduct. For example, for DMT310, the results of our Phase 2a and Phase 2b clinical trials may not accurately predict results in Phase 3 clinical trials that will have larger numbers of patients. Nor will the human safety data collected from our Phase 2a and Phase 2b clinical trial predict the outcome of our pharmacokinetic plan.

The FDA and foreign regulatory bodies have substantial discretion in the drug approval process, including the ability to delay, limit or deny approval of product candidates for many reasons. The FDA or the applicable foreign regulatory body may:

There have been only two products approved by the FDA under the botanical guidance and none in the indication for acne vulgaris with both approved products’ active ingredient coming from an extract of a plant. While freshwater sponges, such as Spongilla, are technically animals, because we are using the entirety of the sponge for the DMT310 drug product, the FDA has allowed us to reference the botanical guidance for raw material quality control relating to the manufacturing of the drug product. We do not know how any other regulatory authority will treat DMT310 for their approval process. In addition, the FDA or other regulatory authorities may change their policies, issue additional regulations or revise existing regulations or take other actions, which may prevent or delay approval of our future products under development on a timely basis. Such policy or regulatory changes could impose additional requirements upon us that could delay our ability to obtain approvals, increase the costs of compliance or restrict our ability to maintain any marketing authorizations we may have obtained.

Any delay, limitation or denial in any applicable regulatory approval for any of our product candidates would delay or adversely impact commercialization of our product candidates and would harm our business, financial condition, operating results and prospects.

We are preparing to conduct our first Phase 3 clinical trials, and may be unable to successfully complete it or any future clinical trials.

The conduct of a Phase 3 clinical trial is a complicated process. Although members of our management team have conducted Phase 3 clinical trials in the past while employed at other companies, we as a company have not conducted a Phase 3 clinical trial before, and as a result may require more time and incur greater costs than we anticipate. Failure to include the correct treatment regimen, complete, or delays in, our Phase 3 clinical trials, could prevent us from or delay us in commencing future clinical trials for DMT310, obtaining regulatory approval of and commercializing our product candidates, which would adversely impact our financial performance. In addition, some of our competitors are currently conducting clinical trials for product candidates that treat the same indications as DMT310, and patients who are otherwise eligible for our clinical trials may instead enroll in clinical trials of our competitors’ product candidates.

Patient enrollment is affected by other factors including:

Even if our current product candidates or any future product candidates obtain regulatory approval, they may fail to achieve the broad degree of physician and patient adoption and use necessary for commercial success.

The commercial success of any of our current or future product candidates, if approved, will depend significantly on the broad adoption and use of the resulting product by physicians, patients and payors for approved indications, and may not be commercially successful. The degree and rate of adoption of our current or future product candidates, if approved, will depend on a number of factors, including:

If any of our current or future product candidates are approved for use but fail to achieve the broad degree of physician and patient adoption necessary for commercial success, our operating results and financial condition will be adversely affected, which may delay, prevent or limit our ability to generate revenue and continue our business.

We intend to seek NCE exclusivity for DMT310 and future product candidates, and we may be unsuccessful in obtaining such exclusivity.

As part of our business strategy, we intend to seek new chemical entity, or NCE, exclusivity for DMT310 or future product candidates. In the United States, a pharmaceutical manufacturer may obtain five years of non-patent exclusivity upon NDA approval of an NCE which is a drug that contains an active moiety that has not been approved by the FDA in any other NDA. An “active moiety” is defined as the molecule or ion responsible for the drug substance’s physiological or pharmacologic action. During the five-year exclusivity period, the FDA cannot accept for filing any ANDA seeking approval of a generic version of that drug or any 505(b)(2) NDA for the same active moiety and that relies on the FDA’s findings regarding that drug, except that FDA may accept an application for filing after four years if the follow-on applicant makes a paragraph IV certification. This exclusivity period may be extended by an additional six months if certain requirements are met to qualify the product for pediatric exclusivity, including the receipt of a written request from the FDA that we conduct certain pediatric studies, the submission of study reports from such studies to the FDA after receipt of the written request and satisfaction of the conditions specified in the written request. We believe that DMT310 constitutes an NCE and should be eligible for NCE exclusivity. However, we may be unable to successfully obtain such exclusivity, and if any of our competitors obtains FDA approval of an NDA for a similar drug product before we do, they, and not us, may be eligible for NCE exclusivity. If we do not obtain NCE exclusivity for DMT310, or if a competitor obtains NCE exclusivity for a similar product before we submit and receive approval of an NDA for DMT310, our ability to commence sales and generate revenue would be adversely affected.

Our product candidates, if approved, will face significant competition and our failure to effectively compete may prevent us from achieving significant market penetration.

The pharmaceutical industry is characterized by rapidly advancing technologies, intense competition and a strong emphasis on developing proprietary therapeutics. Numerous pharmaceutical companies, generic drug companies, biotechnology companies, cosmetic companies and academic and research institutions are engaged in the development, patenting, manufacturing and marketing of health care products competitive with those that we are developing, including VYNE Therapeutics, Cassiopea, Sol-Gel, Arcutis Biotherapeutics, Arena Pharmaceuticals, Amgen, AbbVie, Bristol Meyers Squib, Lilly, Nestle, Pfizer, and others. Many of our competitors have greater financial resources, marketing capabilities, sales forces, manufacturing capabilities, research and development capabilities, clinical trial expertise, intellectual property portfolios, experience in obtaining patents and regulatory approvals for product candidates and other resources than us. Some of the companies that offer competing products also have a broad range of other product offerings, large direct sales forces and long-term customer relationships with our target physicians, which could inhibit our market penetration efforts. In addition, certain of our product candidates, if approved, may compete with other dermatological products, including over-the-counter treatments, for a share of some patients’ discretionary budgets and for physicians’ attention within their clinical practices.

We anticipate that, if we obtain regulatory approval of our product candidates, we will face significant competition from other approved therapies. If approved, our product candidates may also compete with unregulated, unapproved, off-label, and over the counter treatments. Certain of our product candidates, if approved, will present novel therapeutic approaches for the approved indications and will have to compete with existing therapies, some of which are widely known and accepted by physicians and patients. To compete successfully in this market, we will have to demonstrate that the relative cost, safety and efficacy of our approved products, if any, provide an attractive alternative to existing and other new therapies. Such competition could lead to reduced market share for our product candidates and contribute to downward pressure on the pricing of our product candidates, which could harm our business, financial condition, operating results and prospects. For more information about the competition we face, see “Business—Competition.”

Due to less stringent regulatory requirements in certain foreign countries, there are many more dermatological products and procedures available for use in those international markets than are approved for use in the United States. In certain international markets, there are also fewer limitations on the claims that our competitors can make about the effectiveness of their products and the manner in which they can market them. As a result, we expect to face more competition in these markets than in the United States.

We expect to face generic or similar type of product competition for our product candidates, which could adversely affect our business, financial condition, operating results and prospects.

Upon the expiration or loss of any patent protection for any of our product candidates that are approved, or upon the “at-risk” launch, despite pending patent infringement litigation against the generic product or its equivalent, by a generic competitor of a generic version of any of our product candidates that are approved, which may be sold at significantly lower prices than our approved product candidates, we could lose a significant portion of sales of that product in a short period of time, which would adversely affect our business, financial condition, operating results and prospects.

It is unknown how the FDA or any regulatory authority will view an attempted generic version of DMT310 because it is a derived from a natural material that refers to principles of the botanical guidance. There are no currently approved generic versions of a natural product on the market and no FDA guidelines on the approval process for a generic version of a natural product. Therefore, it is unknown how difficult it will be for a generic version of a natural product to be approved for commercial sale in the United States. It is unclear whether the FDA will view spongilla lacustris or a similar sponge species that is harvested from a different location than DMT310 raw material is harvested as identical to DMT310 raw material and therefore could follow the generic pathway to approval.

Any product candidates that we commercialize, or that any partner with which we may collaborate commercializes, will be subject to ongoing and continued regulatory review.

Even after we or our partners achieve U.S. regulatory approval for a product candidate, if any, we or our partners will be subject to continued regulatory review and compliance obligations. For example, with respect to our product candidates, the FDA may impose significant restrictions on the approved indicated uses for which the product may be marketed or on the conditions of approval. A product candidate’s approval may contain requirements for potentially costly post-approval studies and surveillance, including Phase 4 clinical trials or a REMS, to monitor the safety and efficacy of the product. We will also be subject to ongoing FDA obligations and continued regulatory review with respect to, among other things, the manufacturing, processing, labeling, packaging, distribution, adverse event reporting, storage, advertising, promotion and recordkeeping for our product candidates. These requirements include submissions of safety and other post-marketing information and reports, registration, as well as continued compliance with cGMP requirements, with the FDA’s good clinical practice, or GCP, or good agricultural and collections practices, or GACP, requirements and good laboratory practice, or GLP, requirements, which are regulations and guidelines enforced by the FDA for all of our product candidates in clinical and preclinical development, and for any clinical trials that we conduct post-approval. To the extent that a product candidate is approved for sale in other countries, we may be subject to similar restrictions and requirements imposed by laws and government regulators in those countries.

If we, our partners, our product candidates or the manufacturing facilities for our product candidates fail to comply with applicable regulatory requirements, a regulatory agency may:

The regulations, policies or guidance of the FDA and other applicable government agencies may change and new or additional statutes or government regulations may be enacted that could prevent or delay regulatory approval of our product candidates or further restrict or regulate post-approval activities. We cannot predict the likelihood, nature or extent of adverse government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are not able to achieve and maintain regulatory compliance, we may not be permitted to market our product candidates, which would adversely affect our ability to generate revenue and achieve or maintain profitability.

We may in the future conduct clinical trials for our product candidates outside the United States and the FDA and applicable foreign regulatory authorities may not accept data from such trials.

We may in the future choose to conduct one or more of our clinical trials outside the United States, including in Canada, Europe and South America. Although the FDA or applicable foreign regulatory authority may accept data from clinical trials conducted outside the United States or the applicable jurisdiction, acceptance of such study data by the FDA or applicable foreign regulatory authority may be subject to certain conditions. Where data from foreign clinical trials are intended to serve as the basis for marketing approval in the United States, the FDA will not approve the application on the basis of foreign data alone unless those data are applicable to the U.S. population and U.S. medical practice; the studies were performed by clinical investigators of recognized competence; and the data are considered valid without the need for an on-site inspection by the FDA or, if the FDA considers such an inspection to be necessary, the FDA is able to validate the data through an on-site inspection or other appropriate means. Many foreign regulatory bodies have similar requirements. In addition, such foreign studies would be subject to the applicable local laws of the foreign jurisdictions where the studies are conducted. There can be no assurance the FDA or applicable foreign regulatory authority will accept data from trials conducted outside of the United States or the applicable jurisdiction. If the FDA or applicable foreign regulatory authority does not accept such data, it would likely result in the need for additional trials, which would be costly and time-consuming and delay aspects of our business plan.

Our product candidates may cause undesirable side effects or have other unexpected properties that could delay or prevent their regulatory approval, limit the commercial profile of an approved label or result in post-approval regulatory action.

Unforeseen side effects from any of our product candidates could arise either during clinical development or, if approved, after the approved product has been marketed. Undesirable side effects caused by product candidates could cause us, any partners with which we may collaborate or regulatory authorities to interrupt, modify, delay or halt clinical trials and could result in a more restrictive label or the delay or denial of regulatory approval by the FDA or comparable foreign authorities. Results of clinical trials could reveal a high and unacceptable severity and prevalence of side effects. In such an event, trials could be suspended or terminated and the FDA or comparable foreign regulatory authorities could order us, or our potential partners, to cease further development of or deny approval of product candidates for any or all targeted indications. The drug-related side effects could affect patient recruitment or the ability of enrolled patients to complete the trial or result in product liability claims. Any of these occurrences may harm our business, financial condition, operating results and prospects.

Additionally, if we or others identify undesirable side effects, or other previously unknown problems, caused by our product candidates after obtaining U.S. or foreign regulatory approval or other products with the same or related active ingredients, a number of potentially negative consequences could result, including:

Any of the above events resulting from undesirable side effects or other previously unknown problems could prevent us or our potential partners from achieving or maintaining market acceptance of the affected product candidate and could substantially increase the costs of commercializing our product candidates.

We may face product liability exposure, and if successful claims are brought against us, we may incur substantial liability if our insurance coverage for those claims is inadequate.

We face an inherent risk of product liability as a result of the clinical testing of our product candidates and will face an even greater risk if we commercialize any products. This risk exists even if a product is approved for commercial sale by the FDA and manufactured in facilities licensed and regulated by the FDA or an applicable foreign regulatory authority. Our products and product candidates are designed to affect important bodily functions and processes. Any side effects, manufacturing defects, misuse or abuse associated with our product candidates could result in injury to a patient or even death. We cannot offer any assurance that we will not face product liability suits in the future, nor can we assure you that our insurance coverage will be sufficient to cover our liability under any such cases.

In addition, a liability claim may be brought against us even if our product candidates merely appear to have caused an injury. Product liability claims may be brought against us by consumers, health care providers, pharmaceutical companies or others selling or otherwise coming into contact with our product candidates, among others. If we cannot successfully defend ourselves against product liability claims we will incur substantial liabilities and reputational harm. In addition, regardless of merit or eventual outcome, product liability claims may result in:

We currently maintain product liability insurance coverage, which may not be sufficient to cover all of our product liability related expenses or losses and may not cover us for any expenses or losses we may suffer. Moreover, insurance coverage is becoming increasingly expensive, and, in the future, we may not be able to maintain insurance coverage at a reasonable cost, in sufficient amounts or upon adequate terms to protect us against losses due to product liability. We will need to increase our product liability coverage if any of our product candidates receive regulatory approval, which will be costly, and we may be unable to obtain this increased product liability insurance on commercially reasonable terms, or at all. A successful product liability claim or series of claims brought against us could cause our stock price to decline and, if judgments exceed our insurance coverage, could decrease our cash and could harm our business, financial condition, operating results and prospects.

If any of our product candidates are approved for marketing and we are found to have improperly promoted off-label uses, or if physicians misuse our products or use our products off-label, we may become subject to prohibitions on the sale or marketing of our products, product liability claims and significant fines, penalties and sanctions, and our brand and reputation could be harmed.

The FDA and other regulatory agencies strictly regulate the marketing and promotional claims that are made about drug and biologic products. In particular, a product may not be promoted for uses or indications that are not approved by the FDA or such other regulatory agencies as reflected in the product’s approved labeling and comparative safety or efficacy claims cannot be made without direct comparative clinical data. If we are found to have promoted off-label uses of any of our product candidates, we may receive warning or untitled letters and become subject to significant liability, which would materially harm our business. Both federal and state governments have levied large civil and criminal fines against companies for alleged improper promotion and have enjoined several companies from engaging in off-label promotion. If we become the target of such an investigation or prosecution based on our marketing and promotional practices, we could face similar sanctions, which would materially harm our business. In addition, management’s attention could be diverted from our business operations, significant legal expenses could be incurred and our brand and reputation could be damaged. The FDA has also requested that companies enter into consent decrees or permanent injunctions under which specified promotional conduct is changed or curtailed. If we are deemed by the FDA to have engaged in the promotion of our products for off-label use, we could be subject to FDA regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fine or criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our business activities constitute promotion of an off-label use, which could result in significant penalties, including criminal, civil or administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs and the curtailment or restructuring of our operations.

We cannot, however, prevent a physician from using our product candidates outside of those indications for use when in the physician’s independent professional medical judgment he or she deems appropriate. Physicians may also misuse our product candidates or use improper techniques, potentially leading to adverse results, side effects or injury, which may lead to product liability claims. If our product candidates are misused or used with improper technique, we may become subject to costly litigation by physicians or their patients. Furthermore, the use of our product candidates for indications other than those cleared by the FDA may not effectively treat such conditions, which could harm our reputation among physicians and patients.

We may choose not to continue developing or commercializing any of our product candidates at any time during development or after approval, which would reduce or eliminate our potential return on investment for those product candidates.

At any time, we may decide to discontinue the development of any of our product candidates or not to continue commercializing one or more of our approved product candidates for a variety of reasons, including the appearance of new technologies that make our product obsolete, competition from a competing product or changes in or failure to comply with applicable regulatory requirements. If we terminate a program in which we have invested significant resources, we will not receive any return on our investment and we will have missed the opportunity to have allocated those resources to potentially more productive uses.

We or our current and prospective partners may be subject to product recalls in the future that could harm our brand and reputation and could negatively affect our business.

We or our current and prospective partners may be subject to product recalls, withdrawals or seizures if any of our product candidates, if approved for marketing, fail to meet specifications or are believed to cause injury or illness or if we are alleged to have violated governmental regulations including those related to the manufacture, labeling, promotion, sale or distribution. Any recall, withdrawal or seizure in the future could materially and adversely affect consumer confidence in our brands and lead to decreased demand for our approved products. In addition, a recall, withdrawal or seizure of any of our approved products would require significant management attention, would likely result in substantial and unexpected expenditures and would harm our business, financial condition and operating results.

If we or any partners with which we may collaborate are unable to achieve and maintain coverage and adequate levels of reimbursement for any of our product candidates for which we receive regulatory approval, or any future products we may seek to commercialize, their commercial success may be severely hindered.

For any of our product candidates that become available only by prescription, successful sales by us or by any partners with which we may collaborate depend on the availability of coverage and adequate reimbursement from third-party payors. Patients who are prescribed medicine for the treatment of their conditions generally rely on third-party payors to reimburse all or part of the costs associated with their prescription drugs. The availability of coverage and adequate reimbursement from governmental healthcare programs, such as Medicare and Medicaid, and private third-party payors is critical to new product acceptance. Coverage decisions may depend upon clinical and economic standards that disfavor new drug products when more established or lower cost therapeutic alternatives are already available or subsequently become available. If any of our product candidates do not demonstrate attractive efficacy profiles, they may not qualify for coverage and reimbursement. Even if we obtain coverage for a given product, the resulting reimbursement payment rates might not be adequate or may require co-payments that patients find unacceptably high. Patients are unlikely to use our products unless coverage is provided and reimbursement is adequate to cover a significant portion of the cost of our products.

In addition, the market for our product candidates will depend significantly on access to third-party payors’ drug formularies, or lists of medications for which third-party payors provide coverage and reimbursement. The industry competition to be included in such formularies often leads to downward pricing pressures on pharmaceutical companies. Also, third-party payors may refuse to include a particular branded drug in their formularies or otherwise restrict patient access to a branded drug when a less costly generic equivalent or other alternative is available.

Further, third-party payors, whether foreign or domestic, or governmental or commercial, are developing increasingly sophisticated methods of controlling healthcare costs. In addition, in the United States, although private third-party payors tend to follow Medicare, no uniform policy of coverage and reimbursement for drug products exists among third-party payors. Therefore, coverage and reimbursement for drug products can differ significantly from payor to payor. As a result, the coverage determination process is often a time-consuming and costly process that will require us to provide scientific and clinical support for the use of our product candidates to each payor separately, with no assurance that coverage and adequate reimbursement will be obtained.

Further, we believe that future coverage and reimbursement will likely be subject to increased restrictions both in the United States and in international markets. Third-party coverage and reimbursement for any of our product candidates for which we may receive regulatory approval may not be available or adequate in either the United States or international markets, which could harm our business, financial condition, operating results and prospects.

Healthcare legislative or regulatory reform measures, including government restrictions on pricing and reimbursement, may have a negative impact on our business and results of operations.

In the United States and some foreign jurisdictions, there have been, and continue to be, several legislative and regulatory changes and proposed changes regarding the healthcare system that could prevent or delay marketing approval of product candidates, restrict or regulate post approval activities, and affect our ability to profitably sell any product candidates for which we obtain marketing approval.

Among policy makers and payors in the United States and elsewhere, there is significant interest in promoting changes in healthcare systems with the stated goals of containing healthcare costs, improving quality and/or expanding access. In the United States, the pharmaceutical industry has been a particular focus of these efforts and has been significantly affected by major legislative initiatives. For example, in the United States, the Patient Protection and Affordable Care Act of 2010, or the ACA, substantially changed the way health care is financed by both governmental and private insurers and significantly affects the pharmaceutical industry. Many provisions of the ACA impact the biopharmaceutical industry, including that in order for a biopharmaceutical product to receive federal reimbursement under the Medicare Part B and Medicaid programs or to be sold directly to U.S. government agencies, the manufacturer must extend discounts to entities eligible to participate in the drug pricing program under the Public Health Services Act, or PHS. Since its enactment, there have been judicial and Congressional challenges and amendments to certain aspects of the ACA. There is continued uncertainty about the implementation of the ACA, including the potential for further amendments to the ACA and legal challenges to or efforts to repeal the ACA.

Additionally, there has been heightened governmental scrutiny in the United States of pharmaceutical pricing practices in light of the rising cost of prescription drugs and biologics. Such scrutiny has resulted in several recent congressional inquiries and proposed and enacted federal and state legislation designed to, among other things, bring more transparency to product pricing, review the relationship between pricing and manufacturer patient programs, and reform government program reimbursement methodologies for products. At the federal level, the now-departed Trump administration proposed numerous prescription drug cost control measures. Similarly, the new Biden administration has made lowering prescription drug prices one of its priorities. The Biden administration has not yet proposed any specific plans, but we expect that these will be forthcoming in the near term. At the state level, legislatures are increasingly passing legislation and implementing regulations designed to control pharmaceutical and biological product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing.

Other examples of proposed changes include, but are not limited to, expanding post-approval requirements, changing the Orphan Drug Act, and restricting sales and promotional activities for pharmaceutical products.

We cannot be sure whether additional legislative changes will be enacted, or whether government regulations, guidance or interpretations will be changed, or what the impact of such changes would be on the marketing approvals, sales, pricing, or reimbursement of our drug candidates or products, if any, may be. We expect that these and other healthcare reform measures that may be adopted in the future, may result in more rigorous coverage criteria and in additional downward pressure on the price that we receive for any approved drug. Any reduction in reimbursement from Medicare or other government programs may result in a similar reduction in payments from private payors. The implementation of cost containment measures or other healthcare reforms may prevent us from being able to generate revenue, attain profitability, or commercialize our drugs.

In addition, FDA regulations and guidance may be revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. Any new regulations or guidance, or revisions or reinterpretations of existing regulations or guidance, may impose additional costs or lengthen FDA review times for DMT310 or any future product candidates. We cannot determine how changes in regulations, statutes, policies, or interpretations when and if issued, enacted or adopted, may affect our business in the future. Such changes could, among other things, require:

Such changes would likely require substantial time and impose significant costs, or could reduce the potential commercial value of DMT310 or other product candidates. In addition, delays in receipt of or failure to receive regulatory clearances or approvals for any other products would harm our business, financial condition, and results of operations.

We may also be subject to healthcare laws, regulation and enforcement and our failure to comply with those laws could adversely affect our business, operations and financial condition.

Certain federal and state healthcare laws and regulations pertaining to fraud and abuse and patients’ rights are and will be applicable to our business. We are subject to regulation by both the federal government and the states in which we or our partners conduct our business. The laws and regulations that may affect our ability to operate include:

Because of the breadth of these laws and the narrowness of the statutory exceptions and safe harbors available, it is possible that some of our business activities could be subject to challenge under one or more of such laws. In addition, recent health care reform legislation has strengthened these laws. For example, the recently enacted Affordable Care Act, among other things, amended the intent requirement of the federal Anti-Kickback Statute and certain criminal healthcare fraud statutes. A person or entity no longer needs to have actual knowledge of the statute or specific intent to violate it. In addition, the Affordable Care Act provided that the government may assert that a claim including items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal civil False Claims Act.

Achieving and sustaining compliance with these laws may prove costly. In addition, any action against us for violation of these laws, even if we successfully defend against it, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business. If our operations are found to be in violation of any of the laws described above or any other governmental laws or regulations that apply to us, we may be subject to penalties, including administrative, civil and criminal penalties, damages, fines, disgorgement, the exclusion from participation in federal and state healthcare programs, individual imprisonment or the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our financial results.

Our business involves the use of hazardous materials and we and our third-party suppliers and manufacturers must comply with environmental laws and regulations, which can be expensive and restrict how we do business.

The manufacturing activities of our third-party suppliers and manufacturers involve the controlled storage, use and disposal of hazardous materials owned by us, including the components of our product candidates and other hazardous compounds. We and our manufacturers and suppliers are subject to laws and regulations governing the use, manufacture, storage, handling and disposal of these hazardous materials. In some cases, these hazardous materials and various wastes resulting from their use are stored at our suppliers’ or manufacturers’ facilities pending use and disposal. We and our suppliers and manufacturers cannot completely eliminate the risk of contamination, which could cause an interruption of our commercialization efforts, research and development efforts and business operations, injury to our service providers and others and environmental damage resulting in costly clean-up and liabilities under applicable laws and regulations governing the use, storage, handling and disposal of these materials and specified waste products. Although we believe that the safety procedures utilized by our third-party suppliers and manufacturers for handling and disposing of these materials generally comply with the standards prescribed by these laws and regulations, we cannot guarantee that this is the case or eliminate the risk of accidental contamination or injury from these materials. In such an event, we may be held liable for any resulting damages and such liability could exceed our resources. We do not currently carry biological or hazardous waste insurance coverage.

Our employees, independent contractors, principal investigators, consultants, vendors, CROs and any partners with which we may collaborate may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk that our employees, independent contractors, principal investigators, consultants, vendors, CROs and any partners with which we may collaborate may engage in fraudulent or other illegal activity. Misconduct by these persons could include intentional, reckless or negligent conduct or unauthorized activity that violates: laws or regulations, including those laws requiring the reporting of true, complete and accurate information to the FDA or foreign regulatory authorities; manufacturing standards; federal, state and foreign healthcare fraud and abuse laws and data privacy; or laws that require the true, complete and accurate reporting of financial information or data. In particular, sales, marketing and other business arrangements in the healthcare industry are subject to extensive laws intended to prevent fraud, kickbacks, self-dealing and other abusive practices. These laws may restrict or prohibit a wide range of business activities, including research, manufacturing, distribution, pricing, discounting, marketing and promotion, sales commission, customer incentive programs and other business arrangements. Activities subject to these laws also involve the improper use of information obtained in the course of clinical trials, or illegal misappropriation of drug product, which could result in regulatory sanctions or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations, and serious harm to our reputation. In addition, federal procurement laws impose substantial penalties for misconduct in connection with government contracts and require certain contractors to maintain a code of business ethics and conduct. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of civil, criminal and administrative penalties, damages, monetary fines, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, contractual damages, reputational harm, diminished profits and future earnings, and curtailment of our operations, any of which could adversely affect our ability to operate our business and our operating results.

Our future growth depends, in part, on our ability to penetrate foreign markets, where we would be subject to additional regulatory burdens and other risks and uncertainties.

Our future profitability will depend, in part, on our ability to commercialize our product candidates in foreign markets for which we intend to rely on collaborations with third parties. If we commercialize DMT310 or our other product candidates in foreign markets, we would be subject to additional risks and uncertainties, including:

Foreign sales of our product candidates could also be adversely affected by the imposition of governmental controls, political and economic instability, trade restrictions and changes in tariffs, any of which may adversely affect our results of operations.

Development of test methodology for DMT310 presents unique challenges due to the complex mixture of constituents in the product. Determination of appropriate assay(s) for release and quality control evaluations could require significant development time and cost to successfully complete and uncertain.

DMT310 is comprised of both inorganic and organic constituents, and unlike most pharmaceutical products, there is no single active component to characterize for purposes of assay development. In order to release the drug product and test for stability we plan to develop a cell-based bioassay to assess inhibitory effects of DMT310 on pro-inflammatory cytokines known to play a role in the pathogenesis of various skin diseases. While this approach may show activity, it may not be suitable as a quality control release potency assay for DMT310. Furthermore, this technique may not have sufficient sensitivity to be considered stability-indicating and detect small changes or degradation to the product. If we are not able to develop a suitable potency assay utilizing this approach, we may have to identify and develop an alternative bioassay platform or secondary approaches that may require additional orthogonal methodologies to meet our testing requirements. This could be expensive, time consuming and its success uncertain, leading to delays in filing of the NDA.

Risks Related to Our Dependence on Third Parties

We are dependent on one supplier for the raw material used to produce DMT310 and DMT410. The termination of this contract would result in a disruption to product development and our business will be harmed.

We currently only have one qualified source of supply for the raw material used in DMT310 and DMT410. While we have an exclusive supply agreement with our supplier, our supplier may not comply with the terms of our agreement and may supply to third parties. DMT310 and DMT410 contain a wild growing freshwater sponge that grows in an area of the Volga river delta in Russia that is partially protected by a Russian government entity. The Russian government entity allocates a quantity of freshwater sponge that may be harvested each harvest season and may determine in any year that no sponge or a smaller quantity of sponge than harvested in previous years may be harvested in a particular year, which could impact our ability to obtain raw material to manufacture and supply DMT310 and DMT410. If we have not adequately stockpiled raw materials, or even if we do stockpile raw material, we could not have enough raw material to meet the quantity demands to conduct our non-clinical and clinical studies or to supply product for the market if approved.

The freshwater sponge contained in DMT310 and DMT410 can only be harvested once per year based on the presence of certain environmental conditions. If these environmental conditions are not present during the harvest season, then our supplier may not be able to harvest the raw material required, which could impact our ability to manufacture and supply DMT310 and DMT410. The ability of our supplier to harvest the sponge may also be impacted by severe weather and limit the length of time they can harvest, which could limit the amount of raw material that can be harvested, which may impact our ability to manufacture and supply DMT310 and DMT410. The portion of the Volga river delta where the sponge grows could also become contaminated from pollutants, which could contaminate the sponge to be harvested by our supplier, making it unusable in humans, impacting our ability to manufacture and supply DMT310 and DMT410.

Even if we are able to obtain supply, we and our supplier are exposed to a number of environmental and geopolitical risks, including:

Restrictions could be imposed on the harvesting of the raw material. Such events could have a significant impact on our cost and ability to produce Dmt310 and DMT410 and anticipated line extensions. The country from which we obtain the raw material could change its laws and regulations regarding the export of the natural products or impose or increase taxes or duties payable by exporters of such products. In addition, any business, global or economic challenges our existing supplier faces, whether in the ordinary course of business or not, could impair its ability to supply our needs for raw materials. Accordingly, there is a risk that supplies of our raw materials may be significantly delayed by or may become unavailable as a result of any issues affecting our supply and production of naturally sourced products. In addition, if we need a new or additional suppliers, it may take a substantial amount of time and financial resources to identify any additional supplier(s) who can supply our required raw materials in the quality and quantity required for our pre-clinical and we may not be able to negotiate new agreements with an alternate or new supplier on terms that we deem commercially reasonable or at all, and the failure by us to enter into such agreements could harm our financial condition, business, clinical trials and prospects.

Our business may be affected by new sanctions and export controls targeting Russia and other responses to Russia’s invasion of Ukraine.

As a result of Russia’s invasion of Ukraine, the United States, the United Kingdom and the European Union governments, among others, have developed coordinated sanctions and export-control measure packages against Russian individuals and entities. We are currently a party to an exclusive supply agreement for the supply of the Spongilla raw material used in DMT310 and DMT410. The counterparty to this supply agreement is a Russian entity. To date, none of these sanctions or export-controls have impacted our ability to perform under our supply agreement. However, the imposition of enhanced export controls and economic sanctions on transactions with Russia and Russian entities by the United States, the United Kingdom, and/or the European Union could prevent us from performing under this existing contract or any future contract we may enter or remitting payment for raw material purchased from our supplier. While we believe Spongilla raw material is not currently on the restricted list, we are currently working with our supplier for the purchase of additional quantities which, if and when received, will allow us to initiate and complete two Phase 3 studies in acne and file an NDA. Depending on the extent and breadth of new sanctions or export controls that may be imposed against Russia, otherwise or as a result of the impact of the war in the Ukraine, it is possible that our business, results of operations, and financial condition could be materially and adversely affected.

We have in the past relied and expect to continue to rely on third-party CROs and other third parties to conduct and oversee our clinical trials and other aspects of product development. If these third parties do not meet our requirements or otherwise conduct the trials as required, we may not be able to satisfy our contractual obligations or obtain regulatory approval for, or commercialize, our product candidates when expected or at all.

We have in the past relied and expect to continue to rely on third-party CROs to conduct and oversee our clinical trials and other aspects of product development. We also rely upon various medical institutions, clinical investigators and contract laboratories to conduct our trials in accordance with our clinical protocols and all applicable regulatory requirements, including the FDA’s regulations and GCPs, which are an international standard meant to protect the rights and health of patients and to define the roles of clinical trial sponsors, administrators and monitors, and state regulations governing the handling, storage, security and recordkeeping for drug and biologic products. These CROs and other third parties play a significant role in the conduct of these trials and the subsequent collection and analysis of data from the clinical trials. We rely heavily on these parties for the execution of our clinical trials and preclinical studies, and control only certain aspects of their activities. We and our CROs and other third-party contractors are required to comply with GCP, GLP, and GACP requirements, which are regulations and guidelines enforced by the FDA and comparable foreign regulatory authorities for products in clinical development. Regulatory authorities enforce these GCP, GLP and GACP requirements through periodic inspections of trial sponsors, principal investigators and trial sites. If we or any of these third parties fail to comply with applicable GCP, GLP and GACP requirements, the clinical data generated in our clinical trials may be deemed unreliable and the FDA or other regulatory authority may require us to perform additional clinical trials before approving our or our partners’ marketing applications. We cannot assure you that upon inspection by a given regulatory authority, such regulatory authority will determine that any of our clinical or preclinical trials complies with applicable GCP and GLP requirements. In addition, our clinical trials must generally be conducted with product produced under cGMP regulations. Our failure to comply with these regulations and policies may require us to repeat clinical trials, which would delay the regulatory approval process.

Our CROs are not our employees, and we do not control whether or not they devote sufficient time and resources to our clinical trials. Our CROs may also have relationships with other commercial entities, including our competitors, for whom they may also be conducting clinical trials, or other drug development activities, which could harm our competitive position. We face the risk of potential unauthorized disclosure or misappropriation of our intellectual property by CROs, which may reduce our trade secret protection and allow our potential competitors to access and exploit our proprietary technology. If our CROs do not successfully carry out their contractual duties or obligations, fail to meet expected deadlines, or if the quality or accuracy of the clinical data they obtain is compromised due to the failure to adhere to our clinical protocols or regulatory requirements or for any other reason, our clinical trials may be extended, delayed or terminated, and we may not be able to obtain regulatory approval for, or successfully commercialize any product candidate that we develop. As a result, our financial results and the commercial prospects for any product candidate that we develop would be harmed, our costs could increase, and our ability to generate revenue could be delayed.

If any of our CROs or clinical trial sites terminate their involvement in one of our clinical trials for any reason, we may not be able to enter into arrangements with alternative CROs or clinical trial sites, or do so on commercially reasonable terms. In addition, if our relationship with clinical trial sites is terminated, we may experience the loss of follow-up information on patients enrolled in our ongoing clinical trials unless we are able to transfer the care of those patients to another qualified clinical trial site. In addition, principal investigators for our clinical trials may serve as scientific advisors or consultants to us from time to time and could receive cash or equity compensation in connection with such services. If these relationships and any related compensation result in perceived or actual conflicts of interest, the integrity of the data generated at the applicable clinical trial site may be questioned by the FDA

We rely completely on third-party contractors to supply, manufacture and distribute clinical drug supplies for our product candidates, including certain sole-source suppliers and manufacturers, we intend to rely on third parties for commercial supply, manufacturing and distribution if any of our product candidates receive regulatory approval and we expect to rely on third parties for supply, manufacturing and distribution of preclinical, clinical and commercial supplies of any future product candidates.

We do not currently have, nor do we plan to acquire, the infrastructure or capability to supply, manufacture or distribute preclinical, clinical or commercial quantities of drug substances or products. Our ability to develop our product candidates depends and our ability to commercially supply our products will depend, in part, on our ability to successfully obtain the raw materials and APIs and other substances and materials used in our product candidates from third parties and to have finished products manufactured by third parties in accordance with regulatory requirements and in sufficient quantities for preclinical and clinical testing and commercialization. If we fail to develop and maintain supply relationships with these third parties, we may be unable to continue to develop or commercialize our product candidates.

We rely and will continue to rely on certain third parties as the sole source of the materials they supply or the finished products they manufacture. Any of our existing suppliers or manufacturers may:

In the event of any of the foregoing, if we do not have an alternative supplier or manufacturer in place, we would be required to expend substantial management time and expense to identify, qualify and transfer processes to alternative suppliers or manufacturers. Transferring technology to other sites may require additional processes, technologies and validation studies, which are costly, may take considerable amounts of time, may not be successful and, in most cases, require review and approval by the FDA. Any need to find and qualify new suppliers or manufacturers could significantly delay production of our product candidates, adversely impact our ability to market our product candidates and adversely affect our business. Replacements may not be available to us on a timely basis, on acceptable terms or at all. Additionally, we and our manufacturers do not currently maintain significant inventory of drug substances and other materials. Any interruption in the supply of a drug substance or other material or in the manufacture of our product candidates could have a material adverse effect on our business, financial condition, operating results and prospects.

We do not have direct control over the ability of our contract suppliers and manufacturers to maintain adequate capacity and capabilities to serve our needs, including quality control, quality assurance and qualified personnel. Although we are ultimately responsible for ensuring compliance with regulatory requirements such as cGMPs and GACP, we are dependent on our contract suppliers and manufacturers for day-to-day compliance with cGMPs or GACP for production of raw materials, APIs, and finished products. Facilities used by our contract suppliers and manufacturers to produce the APIs and other substances and materials or finished products for commercial sale must pass inspection and be approved by the FDA and other relevant regulatory authorities. Our contract suppliers and manufacturers must comply with cGMP and GACP requirements enforced by the FDA through its facilities inspection program and review of submitted technical information. If the safety of any product or product candidate or component is compromised due to a failure to adhere to applicable laws or for other reasons, we may not be able to successfully commercialize or obtain regulatory approval for the affected product or product candidate, and we may be held liable for injuries sustained as a result. Any of these factors could cause a delay or termination of preclinical studies, clinical trials or regulatory submissions or approvals of our product candidates, and could entail higher costs or result in our being unable to effectively commercialize our approved products on a timely basis, or at all.

In addition, these contract manufacturers are engaged with other companies to supply and manufacture materials or products for such companies, which also exposes our suppliers and manufacturers to regulatory risks for the production of such materials and products. As a result, failure to meet the regulatory requirements for the production of those materials and products may also affect the regulatory clearance of a contract supplier’s or manufacturer’s facility. If the FDA or a comparable foreign regulatory agency does not approve these facilities for the supply or manufacture of our product candidates, or if it withdraws its approval in the future, we may need to find alternative supply or manufacturing facilities, which would negatively impact our ability to develop, obtain regulatory approval of or market our product candidates, if approved.

Our reliance on contract manufacturers and suppliers further exposes us to the possibility that they, or third parties with access to their facilities, will have access to and may misappropriate our trade secrets or other proprietary information.

In addition, the manufacturing facilities of certain of our suppliers, including our supplier of Spongilla lacustris, are located outside of the United States. This may give rise to difficulties in importing our products or product candidates or their components into the United States or other countries as a result of, among other things, regulatory agency approval requirements or import inspections, incomplete or inaccurate import documentation or defective packaging.

If we are not able to establish and maintain collaborations, we may have to alter our development and commercialization plans.

The development and potential commercialization of our product candidates will require substantial additional cash to fund expenses. In order to fund further development of our product candidates, we may collaborate with pharmaceutical and biotechnology companies for the development and potential commercialization of those product candidates. We face significant competition in seeking appropriate partners. Whether we reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the partner’s resources and experience, the terms and conditions of the proposed collaboration and the proposed partner’s evaluation of a number of factors. Those factors may include the design or results of clinical trials; the likelihood of approval by the FDA or other regulatory authorities; the potential market for the subject product candidate; the costs and complexities of manufacturing and delivering such product candidate to patients; the potential of competing products; any uncertainty with respect to our ownership of our intellectual property; and industry and market conditions generally. The partner may also consider alternative product candidates or technologies for similar indications that may be available for collaboration and whether such a collaboration could be more attractive than the one with us for our product candidate. We may also be restricted under future license agreements from entering into agreements on certain terms with potential partners. Collaborations are complex and time-consuming to negotiate and document. In addition, there have been a significant number of recent business combinations among large pharmaceutical companies that have resulted in a reduced number of potential future partners.

Future collaborations we may enter into may involve the following risks:

Collaborations typically impose detailed obligations on each party. If we were to breach our obligations, we may face substantial consequences, including potential termination of the collaboration, and our rights to our partners’ product candidates, in which we have invested substantial time and money, would be lost.

We may not be able to negotiate collaborations on a timely basis, on acceptable terms or at all. If we are unable to do so, we may have to curtail the development of a product candidate, reduce or delay its development program or one or more of our other development programs, delay its potential commercialization or increase our expenditures and undertake development or commercialization activities at our own expense. If we elect to increase our expenditures to fund development or commercialization activities on our own, we may need to obtain additional capital, which may not be available to us on acceptable terms or at all. If we do not have sufficient funds, we may not be able to further develop our product candidates or bring them to market and generate product revenue.

Risks Related to Managing Our Growth, Our Employees and Our Operations

We will need to further increase the size and complexity of our organization in the future, and we may experience difficulties in executing our growth strategy and managing any growth.

Our management, personnel, systems and facilities currently in place are not adequate to support our business plan and near-term future growth. We will need to further expand our chemistry and manufacturing team, clinical team, managerial, operational, financial, and other resources to support our planned research, development and commercialization activities.

To manage our operations, growth and various projects effectively requires that we:

In addition, historically, we have utilized and continue to utilize the services of part-time outside consultants to perform a number of tasks for us, including tasks related to preclinical and clinical testing. Our growth strategy may also entail expanding our use of consultants to implement these and other tasks going forward. We rely on consultants for certain functions of our business and will need to effectively manage these consultants to ensure that they successfully carry out their contractual obligations and meet expected deadlines. There can be no assurance that we will be able to manage our existing consultants or find other competent outside consultants, as needed, on economically reasonable terms, or at all. If we are not able to effectively manage our growth and expand our organization by hiring new employees and expanding our use of consultants, we might be unable to implement successfully the tasks necessary to execute effectively on our planned research, development and commercialization activities and, accordingly, might not achieve our research, development and commercialization goals.

If we fail to attract and retain management and other key personnel, we may be unable to continue to successfully develop or commercialize our product candidates or otherwise implement our business plan.

Our ability to compete in the highly competitive pharmaceuticals industry depends upon our ability to attract and retain highly qualified managerial, scientific, medical, sales and marketing and other personnel. We are highly dependent on our management and scientific personnel, including: our Chief Executive Officer, President and director, Gerald T. Proehl; our Senior Vice President, Regulatory Affairs and Quality Assurance, Maria Bedoya Toro Munera, Ph.D., M.B.A.; and our Senior Vice President, Development, Christopher J. Nardo, M.P.H., Ph.D. The loss of the services of any of these individuals could impede, delay or prevent the successful development of our product pipeline, completion of our planned clinical trials, commercialization of our product candidates or in-licensing or acquisition of new assets and could negatively impact our ability to successfully implement our business plan. If we lose the services of any of these individuals, we might not be able to find suitable replacements on a timely basis or at all, and our business could be harmed as a result. We do not maintain “key man” insurance policies on the lives of these individuals or the lives of any of our other employees. In order to retain valuable employees at our company, in addition to salary and cash incentives, we provide stock options that vest over time. The value to employees of stock options that vest over time will be significantly affected by movements in our stock price that are beyond our control, and may at any time be insufficient to counteract offers from other companies.

We might not be able to attract or retain qualified management and other key personnel in the future due to the intense competition for qualified personnel among biotechnology, pharmaceutical and other businesses, particularly in the San Diego area where we are headquartered. We could have difficulty attracting experienced personnel to our company and may be required to expend significant financial resources in our employee recruitment and retention efforts. Many of the other pharmaceutical companies with whom we compete for qualified personnel have greater financial and other resources, different risk profiles and longer histories in the industry than we do. They also may provide more diverse opportunities and better chances for career advancement. If we are not able to attract and retain the necessary personnel to accomplish our business objectives, we may experience constraints that will harm our ability to implement our business strategy and achieve our business objectives.

In addition, we have scientific and clinical advisors who assist us in formulating our development and clinical strategies. These advisors are not our employees and may have commitments to, or consulting or advisory contracts with, other entities that may limit their availability to us. In addition, our advisors may have arrangements with other companies to assist those companies in developing products or technologies that may compete with ours.

Our ability to attract and retain qualified members of our board of directors may be impacted due to new state laws, including recently enacted gender and diversity quotas.

In September 2018, the state of California enacted SB 826 requiring public companies headquartered in California to maintain minimum female representation on their boards of directors as follows: by the end of 2019, at least one woman on its board, by the end of 2020, public company boards with five members will be required to have at least two female directors, and public company boards with six or more members will be required to have at least three female directors. In September 2020, the state of California enacted AB 979 requiring public companies headquartered in California to maintain minimum representation on their boards of directors from members of underrepresented communities as follow: by the end of 2021, at least one director from an underrepresented community, by end of 2022, public company boards with more than four but fewer than nine members will be required to have at least two directors from underrepresented communities, and public company board with nine or more members will be required to have at least three directors from underrepresented communities. Failure to achieve designated minimum levels in a timely manner exposes such companies to financial penalties and reputational harm. We cannot assure that we can recruit, attract and/or retain qualified members of the board and meet the above quotas as a result of the California laws, which may expose us to penalties and/or reputational harm.

We currently have limited marketing capabilities and no sales organization. If we are unable to establish sales and marketing capabilities on our own or through third parties, we will be unable to successfully commercialize our product candidates, if approved, or generate product revenue.

We currently have limited marketing capabilities and no sales organization. To commercialize our product candidates, if approved, in the United States, Canada, the European Union and other jurisdictions we seek to enter, we must build our marketing, sales, distribution, managerial and other non-technical capabilities or make arrangements with third parties to perform these services, and we may not be successful in doing so. Although our management team has experience in the marketing, sale and distribution of pharmaceutical products from prior employment at other companies, we as a company have no prior experience in the marketing, sale and distribution of pharmaceutical products and there are significant risks involved in building and managing a sales organization, including our ability to hire, retain and incentivize qualified individuals, generate sufficient sales leads, provide adequate training to sales and marketing personnel and effectively manage a geographically dispersed sales and marketing team. Any failure or delay in the development of our internal sales, marketing and distribution capabilities would adversely impact the commercialization of these products. We may choose to collaborate with additional third parties that have direct sales forces and established distribution systems, either to augment our own sales force and distribution systems or in lieu of our own sales force and distribution systems. If we are unable to enter into such arrangements on acceptable terms or at all, we may not be able to successfully commercialize our product candidates. If we are unable to successfully commercialize our product candidates, either on our own or through collaborations with one or more third parties, our business, financial condition, operating results and prospects would suffer.

Our failure to successfully in-license, acquire, develop and market additional product candidates or approved products would impair our ability to grow our business.

We intend to in-license, acquire, develop and market additional products and product candidates and we may in-license or acquire commercial-stage products or engage in other strategic transactions. Because our internal research and development capabilities are limited, we may be dependent upon pharmaceutical companies, academic scientists and other researchers to sell or license products or technology to us. The success of this strategy depends partly upon our ability to identify and select promising pharmaceutical product candidates and products, negotiate licensing or acquisition agreements with their current owners and finance these arrangements.

The process of proposing, negotiating and implementing a license or acquisition of a product candidate or approved product is lengthy and complex. Other companies, including some with substantially greater financial, marketing, sales and other resources, may compete with us for the license or acquisition of product candidates and approved products. We have limited resources to identify and execute the acquisition or in-licensing of third-party products, businesses and technologies and integrate them into our current infrastructure. Moreover, we may devote resources to potential acquisitions or licensing opportunities that are never completed, or we may fail to realize the anticipated benefits of such efforts. We may not be able to acquire the rights to additional product candidates on terms that we find acceptable, or at all.

Further, any product candidate that we acquire may require additional development efforts prior to commercial sale, including preclinical or clinical testing and approval by the FDA and applicable foreign regulatory authorities. All product candidates are prone to risks of failure typical of pharmaceutical product development, including the possibility that a product candidate will not be shown to be sufficiently safe and effective for approval by regulatory authorities. In addition, we cannot provide assurance that any approved products that we acquire will be manufactured or sold profitably or achieve market acceptance.

Additional potential transactions that we may consider include a variety of different business arrangements, including spin-offs, strategic partnerships, joint ventures, restructurings, divestitures, business combinations and investments. Any such transaction may require us to incur non-recurring or other charges, may increase our near- and long-term expenditures and may pose significant integration challenges or disrupt our management or business, which could adversely affect our operations and financial results. For example, these transactions entail numerous potential operational and financial risks, including:

Accordingly, there can be no assurance that we will undertake or successfully complete any transactions of the nature described above, and any transaction that we do complete could harm our business, financial condition, operating results and prospects.

Manufacturing and supply of the APIs and other substances and materials used in our product candidates is a complex and technically challenging undertaking, and there is potential for failure at many points in the manufacturing, testing, quality assurance and distribution supply chain, as well as the potential for latent defects after products have been manufactured and distributed.

Manufacturing and supply of APIs, other substances and materials and finished drug products is technically challenging. Changes beyond our direct control can impact the quality, volume, price and successful delivery of our product candidates and can impede, delay, limit or prevent the successful development and commercialization of our product candidates. Mistakes and mishandling are not uncommon and can affect successful production and supply. Some of these risks include:

Any of these factors could result in delays or higher costs in connection with our clinical trials, regulatory submissions, required approvals or commercialization of our product candidates, which could harm our business, financial condition, operating results and prospects.

Our operating results may fluctuate significantly, which makes our future operating results difficult to predict and could cause our operating results to fall below expectations.

Our operations to date have been primarily limited to researching and developing our product candidates and undertaking preclinical studies and clinical trials of our product candidates. We have not yet obtained regulatory approvals for any of our product candidates. Consequently, any predictions you make about our future success or viability may not be as accurate as they could be if we had a longer operating history or approved products on the market. Furthermore, our operating results may fluctuate due to a variety of other factors, many of which are outside of our control and may be difficult to predict, including the following:

Our operating results and liquidity needs could be negatively affected by market fluctuations and economic downturn.

Our operating results and liquidity could be negatively affected by economic conditions generally, both in the United States and elsewhere around the world. The market for discretionary medical products and procedures may be particularly vulnerable to unfavorable economic conditions. Some patients may consider certain of our product candidates to be discretionary, and if full reimbursement for such products is not available, demand for these products may be tied to the discretionary spending levels of our targeted patient populations. Domestic and international equity and debt markets have experienced and may continue to experience heightened volatility and turmoil based on domestic and international economic conditions and concerns. In the event these economic conditions and concerns continue or worsen and the markets continue to remain volatile, our operating results and liquidity could be adversely affected by those factors in many ways, including weakening demand for certain of our products and making it more difficult for us to raise funds if necessary, and our stock price may decline. Additionally, although we plan to market our products primarily in the United States, our partners have extensive global operations, indirectly exposing us to risk.

Our business and operations would suffer in the event of failures in our internal computer systems.

Despite the implementation of security measures, our internal computer systems and those of our current and any future partners, contractors and consultants are vulnerable to damage from computer viruses, unauthorized access, natural disasters, terrorism, war and telecommunication and electrical failures. While we have not experienced any such material system failure, accident or security breach to date, if such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our manufacturing activities, development programs and our business operations. For example, the loss of manufacturing records or clinical trial data from completed or future clinical trials could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the data. To the extent that any disruption or security breach were to result in a loss of, or damage to, our data or applications, or inappropriate disclosure of confidential or proprietary information, we could incur liability and the further commercialization and development of our products and product candidates could be delayed.

We are increasingly dependent on information technology, and our systems and infrastructure face certain risks, including cybersecurity and data leakage risks.

Significant disruptions to our information technology systems or breaches of information security could adversely affect our business. In the ordinary course of business, we collect, store and transmit large amounts of confidential information, and it is critical that we do so in a secure manner to maintain the confidentiality and integrity of such confidential information. The size and complexity of our information technology systems, and those of our third-party vendors with whom we contract, make such systems potentially vulnerable to service interruptions and security breaches from inadvertent or intentional actions by our employees, partners or vendors, from attacks by malicious third parties, or from intentional or accidental physical damage to our systems infrastructure maintained by us or by third parties. Maintaining the secrecy of this confidential, proprietary, or trade secret information is important to our competitive business position. While we have taken steps to protect such information and invested in information technology, there can be no assurance that our efforts will prevent service interruptions or security breaches in our systems or the unauthorized or inadvertent wrongful use or disclosure of confidential information that could adversely affect our business operations or result in the loss, dissemination, or misuse of critical or sensitive information. A breach of our security measures or the accidental loss, inadvertent disclosure, unapproved dissemination, misappropriation or misuse of trade secrets, proprietary information, or other confidential information, whether as a result of theft, hacking, fraud, trickery or other forms of deception, or for any other reason, could enable others to produce competing products, use our proprietary technology or information, or adversely affect our business or financial condition. Further, any such interruption, security breach, loss or disclosure of confidential information, could result in financial, legal, business, and reputational harm to us and could have a material adverse effect on our business, financial position, results of operations or cash flow.

Risks Related to Our Intellectual Property

We may not be able to obtain or enforce patent rights or other intellectual property rights that cover our product candidates and technologies that are of sufficient breadth to prevent third parties from competing against us.

Our success with respect to our product candidates and technologies will depend in part on our ability to obtain and maintain patent protection in both the United States and other countries, to preserve our trade secrets and to prevent third parties from infringing upon our proprietary rights. Our ability to protect any of our product candidates from unauthorized or infringing use by third parties depends in substantial part on our ability to obtain and maintain valid and enforceable patents or enforce confidentiality contracts.

Our patents include licensed patents and patent applications in the United States and foreign jurisdictions where we believe there is a market opportunity for our products. The covered technology and the scope of coverage vary from country to country. For those countries where we do not have granted patents, we may not have any ability to prevent the unauthorized use of our technologies. Any patents that we may obtain may be narrow in scope and thus easily circumvented by competitors. Further, in countries where we do not have granted patents, third parties may be able to make, use or sell products identical to or substantially similar to, our product candidates.

The patent application process, also known as patent prosecution, is expensive and time-consuming, and we and our current or future licensors and licensees may not be able to prepare, file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. It is also possible that we or our current licensors, or any future licensors or licensees, will fail to identify patentable aspects of inventions made in the course of development and commercialization activities before it is too late to obtain patent protection on them. Therefore, these and any of our patents and applications may not be prosecuted and enforced in a manner consistent with the best interests of our business. It is possible that defects of form in the preparation or filing of our patents or patent applications may exist, or may arise in the future, such as with respect to proper priority claims, inventorship, claim scope or patent term adjustments. If our current licensors, or any future licensors or licensees, are not fully cooperative or disagree with us as to the prosecution, maintenance or enforcement of any patent rights, such patent rights could be compromised and we might not be able to prevent third parties from making, using and selling competing products. If there are material defects in the form or preparation of our patents or patent applications, such patents or applications may be invalid and unenforceable. Moreover, our competitors may independently develop equivalent knowledge, methods and know-how. Any of these outcomes could impair our ability to prevent competition from third parties, which may have an adverse impact on our business, financial condition and operating results.

Due to legal standards relating to patentability, validity, enforceability and claim scope of patents covering pharmaceutical inventions, our ability to obtain, maintain and enforce patents is uncertain and involves complex legal and factual questions. Accordingly, rights under any existing patents or any patents we might obtain or license may not cover our product candidates, or may not provide us with sufficient protection for our product candidates to afford a commercial advantage against competitive products or processes, including those from branded and generic pharmaceutical companies. In addition, we cannot guarantee that any patents will issue from any pending or future patent applications owned by or licensed to us. Even if patents have issued or will issue, we cannot guarantee that the claims of these patents are or will be held valid or enforceable by the courts or will provide us with any significant protection against competitive products or otherwise be commercially valuable to us.

Competitors in the field of dermatologic therapeutics have created a substantial amount of prior art, including scientific publications, patents and patent applications. Our ability to obtain and maintain valid and enforceable patents depends on whether the differences between our technology and the prior art allow our technology to be patentable over the prior art. Although we believe that our technology includes certain inventions that are unique and not duplicative of any prior art, we do not have outstanding issued patents covering all of the recent developments in our technology and we are unsure of the patent protection that we will be successful in obtaining, if any. Even if the patents do successfully issue, third parties may design around or challenge the validity, enforceability or scope of such issued patents or any other issued patents we own or license, which may result in such patents being narrowed, invalidated or held unenforceable. If the breadth or strength of protection provided by the patents we hold or pursue with respect to our product candidates is challenged, it could dissuade companies from collaborating with us to develop, or threaten our ability to commercialize, our product candidates.

The laws of some foreign jurisdictions do not provide intellectual property rights to the same extent as in the United States and many companies have encountered significant difficulties in protecting and defending such rights in foreign jurisdictions. If we encounter such difficulties in protecting or are otherwise precluded from effectively protecting our intellectual property in foreign jurisdictions, our business prospects could be substantially harmed. The patent positions of pharmaceutical and biotechnology companies can be highly uncertain and involve complex legal and factual questions for which important legal principles remain unresolved. Changes in either the patent laws or in the interpretations of patent laws in the United States and other countries may diminish the value of our intellectual property. Accordingly, we cannot predict the breadth of claims that may be allowed or enforced in our patents or in third-party patents.

The degree of future protection of our proprietary rights is uncertain. Patent protection may be unavailable or severely limited in some cases and may not adequately protect our rights or permit us to gain or keep our competitive advantage. For example: